040.PGSQL-备份和恢复-增量备份-创建基础备份

本文主要是介绍040.PGSQL-备份和恢复-增量备份-创建基础备份，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

增量备份-创建基础备份

使用pg_basebackup 创建基础备份

[postgres@s101 /usr/pgsql-13/bin]$

pg_basebackup

设置配置文件pg_hba.conf，添加连接信息，否则会报错

[postgres@s101 /usr/pgsql-13/bin]$/usr/pgsql-13/bin/pg_basebackup   -D /var/lib/pgsql/13/backups  -Ft  -Pv  -Xf  -z  -Z5  -h 192.168.17.101 -U postgres  -p 5432
pg_basebackup: error: FATAL:  no pg_hba.conf entry for replication connection from host "192.168.17.101", user "postgres", SSL off

[root@s101 /var/lib/pgsql/13/data]#nano pg_hba.conf

# Allow replication connections from localhost, by a user with the
# replication privilege.
host replication postgres 192.168.17.101/32 trust

重启数据库

[root@s101 /var/lib/pgsql/13/data]#sudo systemctl restart postgresql-13

使用pg_basebackup 创建基础备份

/usr/pgsql-13/bin/pg_basebackup   -D /var/lib/pgsql/13/backups  -Ft  -Pv  -Xf  -z  -Z5  -h 192.168.17.101 -U postgres  -p 5432
-D
-F
-P
-v
-X
-z, --gzip compress tar output 使用gzip压缩，仅能能与tar输出模式配合使用

-Z, --compress=0-9     compress tar output with given compression level   指定压缩级别

 参考 ： https://blog.csdn.net/feixiangtianshi/article/details/49152691

[postgres@s101 /usr/pgsql-13/bin]$/usr/pgsql-13/bin/pg_basebackup   -D /var/lib/pgsql/13/backups  -Ft  -Pv  -Xf  -z  -Z5  -h 192.168.17.101 -U postgres  -p 5432
pg_basebackup: initiating base backup, waiting for checkpoint to complete
pg_basebackup: checkpoint completed
pg_basebackup: write-ahead log start point: 0/D0000028 on timeline 1
935818/935818 kB (100%), 2/2 tablespaces
pg_basebackup: write-ahead log end point: 0/D0000138
pg_basebackup: syncing data to disk ...
pg_basebackup: renaming backup_manifest.tmp to backup_manifest
pg_basebackup: base backup completed

查看备份文件

帮助文档

[root@s101 /usr/pgsql-13]#pg_basebackup --help
pg_basebackup takes a base backup of a running PostgreSQL server.

Usage:
  pg_basebackup [OPTION]...

Options controlling the output:
  -D, --pgdata=DIRECTORY receive base backup into directory
  -F, --format=p|t       output format (plain (default), tar)
  -r, --max-rate=RATE    maximum transfer rate to transfer data directory
                         (in kB/s, or use suffix "k" or "M")
  -R, --write-recovery-conf
                         write configuration for replication
  -T, --tablespace-mapping=OLDDIR=NEWDIR
                         relocate tablespace in OLDDIR to NEWDIR
      --waldir=WALDIR    location for the write-ahead log directory
  -X, --wal-method=none|fetch|stream
                         include required WAL files with specified method
  -z, --gzip             compress tar output
  -Z, --compress=0-9     compress tar output with given compression level

General options:
  -c, --checkpoint=fast|spread
                         set fast or spread checkpointing
  -C, --create-slot      create replication slot
  -l, --label=LABEL      set backup label
  -n, --no-clean         do not clean up after errors
  -N, --no-sync          do not wait for changes to be written safely to disk
  -P, --progress         show progress information
  -S, --slot=SLOTNAME    replication slot to use
  -v, --verbose          output verbose messages
  -V, --version          output version information, then exit
      --manifest-checksums=SHA{224,256,384,512}|CRC32C|NONE
                         use algorithm for manifest checksums
      --manifest-force-encode
                         hex encode all file names in manifest
      --no-estimate-size do not estimate backup size in server side
      --no-manifest      suppress generation of backup manifest
      --no-slot          prevent creation of temporary replication slot
      --no-verify-checksums
                         do not verify checksums
  -?, --help             show this help, then exit

Connection options:
  -d, --dbname=CONNSTR   connection string
  -h, --host=HOSTNAME    database server host or socket directory
  -p, --port=PORT        database server port number
  -s, --status-interval=INTERVAL
                         time between status packets sent to server (in seconds)
  -U, --username=NAME    connect as specified database user
  -w, --no-password      never prompt for password
  -W, --password         force password prompt (should happen automatically)

Report bugs to <pgsql-bugs@lists.postgresql.org>.
PostgreSQL home page: <https://www.postgresql.org/>

这篇关于040.PGSQL-备份和恢复-增量备份-创建基础备份的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！