Flink基础（121）：FLINK-SQL语法 (15) DQL(7) OPERATIONS(4) 窗口 (2) 窗口聚合

本文主要是介绍Flink基础（121）：FLINK-SQL语法 (15) DQL(7) OPERATIONS(4) 窗口 (2) 窗口聚合，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

1 Window TVF Aggregation 

Streaming

Window aggregations are defined in the GROUP BY clause contains “window_start” and “window_end” columns of the relation applied Windowing TVF. Just like queries with regular GROUP BY clauses, queries with a group by window aggregation will compute a single result row per group.

SELECT ...
FROM <windowed_table> -- relation applied windowing TVF
GROUP BY window_start, window_end, ...

Unlike other aggregations on continuous tables, window aggregation do not emit intermediate results but only a final result, the total aggregation at the end of the window. Moreover, window aggregations purge all intermediate state when no longer needed.

1.1 Windowing TVFs 

Flink supports TUMBLE, HOP and CUMULATE types of window aggregations, which can be defined on either event or processing time attributes. See Windowing TVF for more windowing functions information.

Here are some examples for TUMBLE, HOP and CUMULATE window aggregations.

-- tables must have time attribute, e.g. `bidtime` in this table
Flink SQL> desc Bid;
+-------------+------------------------+------+-----+--------+---------------------------------+
|        name |                   type | null | key | extras |                       watermark |
+-------------+------------------------+------+-----+--------+---------------------------------+
|     bidtime | TIMESTAMP(3) *ROWTIME* | true |     |        | `bidtime` - INTERVAL '1' SECOND |
|       price |         DECIMAL(10, 2) | true |     |        |                                 |
|        item |                 STRING | true |     |        |                                 |
| supplier_id |                 STRING | true |     |        |                                 |
+-------------+------------------------+------+-----+--------+---------------------------------+

Flink SQL> SELECT * FROM Bid;
+------------------+-------+------+-------------+
|          bidtime | price | item | supplier_id |
+------------------+-------+------+-------------+
| 2020-04-15 08:05 | 4.00  | C    | supplier1   |
| 2020-04-15 08:07 | 2.00  | A    | supplier1   |
| 2020-04-15 08:09 | 5.00  | D    | supplier2   |
| 2020-04-15 08:11 | 3.00  | B    | supplier2   |
| 2020-04-15 08:13 | 1.00  | E    | supplier1   |
| 2020-04-15 08:17 | 6.00  | F    | supplier2   |
+------------------+-------+------+-------------+

-- tumbling window aggregation
Flink SQL> SELECT window_start, window_end, SUM(price)
  FROM TABLE(
    TUMBLE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end;
+------------------+------------------+-------+
|     window_start |       window_end | price |
+------------------+------------------+-------+
| 2020-04-15 08:00 | 2020-04-15 08:10 | 11.00 |
| 2020-04-15 08:10 | 2020-04-15 08:20 | 10.00 |
+------------------+------------------+-------+

-- hopping window aggregation
Flink SQL> SELECT window_start, window_end, SUM(price)
  FROM TABLE(
    HOP(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '5' MINUTES, INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end;
+------------------+------------------+-------+
|     window_start |       window_end | price |
+------------------+------------------+-------+
| 2020-04-15 08:00 | 2020-04-15 08:10 | 11.00 |
| 2020-04-15 08:05 | 2020-04-15 08:15 | 15.00 |
| 2020-04-15 08:10 | 2020-04-15 08:20 | 10.00 |
| 2020-04-15 08:15 | 2020-04-15 08:25 | 6.00  |
+------------------+------------------+-------+

-- cumulative window aggregation
Flink SQL> SELECT window_start, window_end, SUM(price)
  FROM TABLE(
    CUMULATE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '2' MINUTES, INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end;
+------------------+------------------+-------+
|     window_start |       window_end | price |
+------------------+------------------+-------+
| 2020-04-15 08:00 | 2020-04-15 08:06 | 4.00  |
| 2020-04-15 08:00 | 2020-04-15 08:08 | 6.00  |
| 2020-04-15 08:00 | 2020-04-15 08:10 | 11.00 |
| 2020-04-15 08:10 | 2020-04-15 08:12 | 3.00  |
| 2020-04-15 08:10 | 2020-04-15 08:14 | 4.00  |
| 2020-04-15 08:10 | 2020-04-15 08:16 | 4.00  |
| 2020-04-15 08:10 | 2020-04-15 08:18 | 10.00 |
| 2020-04-15 08:10 | 2020-04-15 08:20 | 10.00 |
+------------------+------------------+-------+

Note: in order to better understand the behavior of windowing, we simplify the displaying of timestamp values to not show the trailing zeros, e.g. 2020-04-15 08:05 should be displayed as 2020-04-15 08:05:00.000 in Flink SQL Client if the type is TIMESTAMP(3).

1.2 GROUPING SETS 

Window aggregations also support GROUPING SETS syntax. Grouping sets allow for more complex grouping operations than those describable by a standard GROUP BY. Rows are grouped separately by each specified grouping set and aggregates are computed for each group just as for simple GROUP BY clauses.

Window aggregations with GROUPING SETS require both the window_start and window_end columns have to be in the GROUP BY clause, but not in the GROUPING SETS clause.

Flink SQL> SELECT window_start, window_end, supplier_id, SUM(price) as price
  FROM TABLE(
    TUMBLE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end, GROUPING SETS ((supplier_id), ());
+------------------+------------------+-------------+-------+
|     window_start |       window_end | supplier_id | price |
+------------------+------------------+-------------+-------+
| 2020-04-15 08:00 | 2020-04-15 08:10 |      (NULL) | 11.00 |
| 2020-04-15 08:00 | 2020-04-15 08:10 |   supplier2 |  5.00 |
| 2020-04-15 08:00 | 2020-04-15 08:10 |   supplier1 |  6.00 |
| 2020-04-15 08:10 | 2020-04-15 08:20 |      (NULL) | 10.00 |
| 2020-04-15 08:10 | 2020-04-15 08:20 |   supplier2 |  9.00 |
| 2020-04-15 08:10 | 2020-04-15 08:20 |   supplier1 |  1.00 |
+------------------+------------------+-------------+-------+

Each sublist of GROUPING SETS may specify zero or more columns or expressions and is interpreted the same way as though used directly in the GROUP BY clause. An empty grouping set means that all rows are aggregated down to a single group, which is output even if no input rows were present.

References to the grouping columns or expressions are replaced by null values in result rows for grouping sets in which those columns do not appear.

1.2.2 ROLLUP 

ROLLUP is a shorthand notation for specifying a common type of grouping set. It represents the given list of expressions and all prefixes of the list, including the empty list.

Window aggregations with ROLLUP requires both the window_start and window_end columns have to be in the GROUP BY clause, but not in the ROLLUP clause.

For example, the following query is equivalent to the one above.

SELECT window_start, window_end, supplier_id, SUM(price) as price
FROM TABLE(
    TUMBLE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '10' MINUTES))
GROUP BY window_start, window_end, ROLLUP (supplier_id);

1.2.3 CUBE 

CUBE is a shorthand notation for specifying a common type of grouping set. It represents the given list and all of its possible subsets - the power set.

Window aggregations with CUBE requires both the window_start and window_end columns have to be in the GROUP BY clause, but not in the CUBE clause.

For example, the following two queries are equivalent.

SELECT window_start, window_end, item, supplier_id, SUM(price) as price
  FROM TABLE(
    TUMBLE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end, CUBE (supplier_id, item);

SELECT window_start, window_end, item, supplier_id, SUM(price) as price
  FROM TABLE(
    TUMBLE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end, GROUPING SETS (
      (supplier_id, item),
      (supplier_id      ),
      (             item),
      (                 )
)

1.3 Selecting Group Window Start and End Timestamps 

The start and end timestamps of group windows can be selected with the grouped window_start and window_end columns.

1.4 Cascading Window Aggregation 

The window_start and window_end columns are regular timestamp columns, not time attributes. Thus they can’t be used as time attributes in subsequent time-based operations. In order to propagate time attributes, you need to additionally add window_time column into GROUP BY clause. The window_time is the third column produced by Windowing TVFs which is a time attribute of the assigned window. Adding window_time into GROUP BY clause makes window_time also to be group key that can be selected. Then following queries can use this column for subsequent time-based operations, such as cascading window aggregations and Window TopN.

The following shows a cascading window aggregation where the first window aggregation propagates the time attribute for the second window aggregation.

-- tumbling 5 minutes for each supplier_id
CREATE VIEW window1 AS
SELECT window_start, window_end, window_time as rowtime, SUM(price) as partial_price
  FROM TABLE(
    TUMBLE(TABLE Bid, DESCRIPTOR(bidtime), INTERVAL '5' MINUTES))
  GROUP BY supplier_id, window_start, window_end, window_time;

-- tumbling 10 minutes on the first window
SELECT window_start, window_end, SUM(partial_price) as total_price
  FROM TABLE(
      TUMBLE(TABLE window1, DESCRIPTOR(rowtime), INTERVAL '10' MINUTES))
  GROUP BY window_start, window_end;

2 Group Window Aggregation 

Batch Streaming

Warning: Group Window Aggregation is deprecated. It’s encouraged to use Window TVF Aggregation which is more powerful and effective.

Group Window Aggregations are defined in the GROUP BY clause of a SQL query. Just like queries with regular GROUP BY clauses, queries with a GROUP BY clause that includes a group window function compute a single result row per group. The following group windows functions are supported for SQL on batch and streaming tables.

2.1 Group Window Functions 

2.2 Time Attributes

For SQL queries on streaming tables, the time_attr argument of the group window function must refer to a valid time attribute that specifies the processing time or event time of rows. See the documentation of time attributes to learn how to define time attributes.

For SQL on batch tables, the time_attr argument of the group window function must be an attribute of type TIMESTAMP.

2.3 Selecting Group Window Start and End Timestamps

The start and end timestamps of group windows as well as time attributes can be selected with the following auxiliary functions:

Note: Auxiliary functions must be called with exactly same arguments as the group window function in the GROUP BY clause.

The following examples show how to specify SQL queries with group windows on streaming tables.

CREATE TABLE Orders (
  user       BIGINT,
  product    STIRNG,
  amount     INT,
  order_time TIMESTAMP(3),
  WATERMARK FOR order_time AS order_time - INTERVAL '1' MINUTE
) WITH (...);

SELECT
  user,
  TUMBLE_START(order_time, INTERVAL '1' DAY) AS wStart,
  SUM(amount) FROM Orders
GROUP BY
  TUMBLE(order_time, INTERVAL '1' DAY),
  user

这篇关于Flink基础（121）：FLINK-SQL语法 (15) DQL(7) OPERATIONS(4) 窗口 (2) 窗口聚合的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！