Linux netstat命令

本文主要是介绍Linux netstat命令，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

Linux netstat命令

Linux netstat 命令用于显示网络状态。

利用 netstat 指令可让你得知整个 Linux 系统的网络情况。

语法

netstat [-acCeFghilMnNoprstuvVwx][-A<网络类型>][--ip]

参数说明：

• -a或--all 显示所有连线中的Socket。
• -A<网络类型>或--<网络类型> 列出该网络类型连线中的相关地址。
• -c或--continuous 持续列出网络状态。
• -C或--cache 显示路由器配置的快取信息。
• -e或--extend 显示网络其他相关信息。
• -F或--fib 显示FIB。
• -g或--groups 显示多重广播功能群组组员名单。
• -h或--help 在线帮助。
• -i或--interfaces 显示网络界面信息表单。
• -l或--listening 显示监控中的服务器的Socket。
• -M或--masquerade 显示伪装的网络连线。
• -n或--numeric 直接使用IP地址，而不通过域名服务器。
• -N或--netlink或--symbolic 显示网络硬件外围设备的符号连接名称。
• -o或--timers 显示计时器。
• -p或--programs 显示正在使用Socket的程序识别码和程序名称。
• -r或--route 显示Routing Table。
• -s或--statistics 显示网络工作信息统计表。
• -t或--tcp 显示TCP传输协议的连线状况。
• -u或--udp 显示UDP传输协议的连线状况。
• -v或--verbose 显示指令执行过程。
• -V或--version 显示版本信息。
• -w或--raw 显示RAW传输协议的连线状况。
• -x或--unix 此参数的效果和指定"-A unix"参数相同。
• --ip或--inet 此参数的效果和指定"-A inet"参数相同。

实例

显示详细的网络状况

# netstat -a

显示当前户籍UDP连接状况

# netstat -nu

显示UDP端口号的使用情况

# netstat -apu

Active Internet connections (servers and established)

Proto Recv-Q Send-Q Local Address        Foreign Address       State    PID/Program name  

udp    0   0 *:32768           *:*                   -          

udp    0   0 *:nfs            *:*                   -          

udp    0   0 *:641            *:*                   3006/rpc.statd   

udp    0   0 192.168.0.3:netbios-ns   *:*                   3537/nmbd      

udp    0   0 *:netbios-ns        *:*                   3537/nmbd      

udp    0   0 192.168.0.3:netbios-dgm   *:*                   3537/nmbd      

udp    0   0 *:netbios-dgm        *:*                   3537/nmbd      

udp    0   0 *:tftp           *:*                   3346/xinetd     

udp    0   0 *:999            *:*                   3366/rpc.rquotad  

udp    0   0 *:sunrpc          *:*                   2986/portmap    

udp    0   0 *:ipp            *:*                   6938/cupsd     

udp    0   0 *:1022           *:*                   3392/rpc.mountd   

udp    0   0 *:638            *:*                   3006/rpc.statd

显示网卡列表

# netstat -i

Kernel Interface table

Iface    MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OVR Flg

eth0    1500  0  181864   0   0   0  141278   0   0   0 BMRU

lo    16436  0   3362   0   0   0   3362   0   0   0 LRU

显示组播组的关系

# netstat -g

IPv6/IPv4 Group Memberships

Interface    RefCnt Group

--------------- ------ ---------------------

lo       1   ALL-SYSTEMS.MCAST.NET

eth0      1   ALL-SYSTEMS.MCAST.NET

lo       1   ff02::1

eth0      1   ff02::1:ff0a:b0c

eth0      1   ff02::1

显示网络统计信息

# netstat -s

Ip:

  184695 total packets received

  0 forwarded

  0 incoming packets discarded

  184687 incoming packets delivered

  143917 requests sent out

  32 outgoing packets dropped

  30 dropped because of missing route

Icmp:

  676 ICMP messages received

  5 input ICMP message failed.

  ICMP input histogram:

    destination unreachable: 44

    echo requests: 287

    echo replies: 345

  304 ICMP messages sent

  0 ICMP messages failed

  ICMP output histogram:

    destination unreachable: 17

    echo replies: 287

Tcp:

  473 active connections openings

  28 passive connection openings

  4 failed connection attempts

  11 connection resets received

  1 connections established

  178253 segments received

  137936 segments send out

  29 segments retransmited

  0 bad segments received.

  336 resets sent

Udp:

  5714 packets received

  8 packets to unknown port received.

  0 packet receive errors

  5419 packets sent

TcpExt:

  1 resets received for embryonic SYN_RECV sockets

  ArpFilter: 0

  12 TCP sockets finished time wait in fast timer

  572 delayed acks sent

  3 delayed acks further delayed because of locked socket

  13766 packets directly queued to recvmsg prequeue.

  1101482 packets directly received from backlog

  19599861 packets directly received from prequeue

  46860 packets header predicted

  14541 packets header predicted and directly queued to user

  TCPPureAcks: 12259

  TCPHPAcks: 9119

  TCPRenoRecovery: 0

  TCPSackRecovery: 0

  TCPSACKReneging: 0

  TCPFACKReorder: 0

  TCPSACKReorder: 0

  TCPRenoReorder: 0

  TCPTSReorder: 0

  TCPFullUndo: 0

  TCPPartialUndo: 0

  TCPDSACKUndo: 0

  TCPLossUndo: 0

  TCPLoss: 0

  TCPLostRetransmit: 0

  TCPRenoFailures: 0

  TCPSackFailures: 0

  TCPLossFailures: 0

  TCPFastRetrans: 0

  TCPForwardRetrans: 0

  TCPSlowStartRetrans: 0

  TCPTimeouts: 29

  TCPRenoRecoveryFail: 0

  TCPSackRecoveryFail: 0

  TCPSchedulerFailed: 0

  TCPRcvCollapsed: 0

  TCPDSACKOldSent: 0

  TCPDSACKOfoSent: 0

  TCPDSACKRecv: 0

  TCPDSACKOfoRecv: 0

  TCPAbortOnSyn: 0

  TCPAbortOnData: 1

  TCPAbortOnClose: 0

  TCPAbortOnMemory: 0

  TCPAbortOnTimeout: 3

  TCPAbortOnLinger: 0

  TCPAbortFailed: 3

  TCPMemoryPressures: 0

显示监听的套接口

# netstat -l

Active Internet connections (only servers)

Proto Recv-Q Send-Q Local Address        Foreign Address       State   

tcp    0   0 *:32769           *:*             LISTEN   

tcp    0   0 *:nfs            *:*             LISTEN   

tcp    0   0 *:644            *:*             LISTEN   

tcp    0   0 *:1002           *:*             LISTEN   

tcp    0   0 *:netbios-ssn        *:*             LISTEN   

tcp    0   0 *:sunrpc          *:*             LISTEN   

tcp    0   0 vm-dev:ipp         *:*             LISTEN   

tcp    0   0 *:telnet          *:*             LISTEN   

tcp    0   0 *:601            *:*             LISTEN   

tcp    0   0 *:microsoft-ds       *:*             LISTEN   

tcp    0   0 *:http           *:*             LISTEN   

tcp    0   0 *:ssh            *:*             LISTEN   

tcp    0   0 *:https           *:*             LISTEN   

udp    0   0 *:32768           *:*                   

udp    0   0 *:nfs            *:*                   

udp    0   0 *:641            *:*                   

udp    0   0 192.168.0.3:netbios-ns   *:*                   

udp    0   0 *:netbios-ns        *:*                   

udp    0   0 192.168.0.3:netbios-dgm   *:*                   

udp    0   0 *:netbios-dgm        *:*                   

udp    0   0 *:tftp           *:*                   

udp    0   0 *:999            *:*                   

udp    0   0 *:sunrpc          *:*                   

udp    0   0 *:ipp            *:*                   

udp    0   0 *:1022           *:*                   

udp    0   0 *:638            *:*                   

Active UNIX domain sockets (only servers)

Proto RefCnt Flags    Type    State     I-Node Path

unix 2   [ ACC ]   STREAM   LISTENING   10621 @/tmp/fam-root-

unix 2   [ ACC ]   STREAM   LISTENING   7096  /var/run/acpid.socket

unix 2   [ ACC ]   STREAM   LISTENING   9792  /tmp/.gdm_socket

unix 2   [ ACC ]   STREAM   LISTENING   9927  /tmp/.X11-unix/X0

unix 2   [ ACC ]   STREAM   LISTENING   10489 /tmp/ssh-lbUnUf4552/agent.4552

unix 2   [ ACC ]   STREAM   LISTENING   10558 /tmp/ksocket-root/kdeinit__0

unix 2   [ ACC ]   STREAM   LISTENING   10560 /tmp/ksocket-root/kdeinit-:0

unix 2   [ ACC ]   STREAM   LISTENING   10570 /tmp/.ICE-unix/dcop4664-1270815442

unix 2   [ ACC ]   STREAM   LISTENING   10843 /tmp/.ICE-unix/4735

unix 2   [ ACC ]   STREAM   LISTENING   10591 /tmp/ksocket-root/klauncherah3arc.slave-socket

unix 2   [ ACC ]   STREAM   LISTENING   7763  /var/run/iiim/.iiimp-unix/9010

unix 2   [ ACC ]   STREAM   LISTENING   11047 /tmp/orbit-root/linc-1291-0-1e92c8082411

unix 2   [ ACC ]   STREAM   LISTENING   11053 /tmp/orbit-root/linc-128e-0-dc070659cbb3

unix 2   [ ACC ]   STREAM   LISTENING   8020  /var/run/dbus/system_bus_socket

unix 2   [ ACC ]   STREAM   LISTENING   58927 /tmp/mcop-root/vm-dev-2c28-4beba75f

unix 2   [ ACC ]   STREAM   LISTENING   7860  /tmp/.font-unix/fs7100

unix 2   [ ACC ]   STREAM   LISTENING   7658  /dev/gpmctl

unix 2   [ ACC ]   STREAM   LISTENING   10498 @/tmp/dbus-s2MLJGO5Ci

这篇关于Linux netstat命令的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！