mlx90614红外传感器

本文主要是介绍mlx90614红外传感器，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

 

 

 

 

 

 

线接法 1

 

l  vin ↔ 3V  物理引脚 1

l  gnd ↔ gnd  物理引脚 6

l  scl ↔ SCL.1 物理引脚 5

l  sda ↔ SDA.1 物理引脚 3

 

 

线接法 2

MLX90614 Sensor	Raspberry Pi
VIN	5V (Pin 2)
GND	GND (Pin 6)
SCL	GPIO 3 (Pin 5)
SDA	GPIO 2 (Pin 3)

 

 

 

 

 

 

 

 

安装IIC库

sudo apt install i2c-tools

 

安装python的smbus

sudo apt install python-smbus

 

打开IIC

sudo raspi-config 选择

 

3. Interface options --5. I2C --  Enable --Yes

 

 

查看地址 i2cdetect -y -a 1

这里地址是 0x5a

 

 

 

 

近距离测试 , 此时 未用 补偿算法 

 

 

 

获取数值

方法1

mlx90614.py

 

import smbus

from time import sleep

 

class MLX90614():

 

    MLX90614_RAWIR1=0x04

    MLX90614_RAWIR2=0x05

    MLX90614_TA=0x06

    MLX90614_TOBJ1=0x07

    MLX90614_TOBJ2=0x08

 

    MLX90614_TOMAX=0x20

    MLX90614_TOMIN=0x21

    MLX90614_PWMCTRL=0x22

    MLX90614_TARANGE=0x23

    MLX90614_EMISS=0x24

    MLX90614_CONFIG=0x25

    MLX90614_ADDR=0x0E

    MLX90614_ID1=0x3C

    MLX90614_ID2=0x3D

    MLX90614_ID3=0x3E

    MLX90614_ID4=0x3F

 

    comm_retries = 5

    comm_sleep_amount = 0.1

 

    def __init__(self, address=0x5a, bus_num=1):

        self.bus_num = bus_num

        self.address = address

        self.bus = smbus.SMBus(bus=bus_num)

 

    def read_reg(self, reg_addr):

        err = None

        for i in range(self.comm_retries):

            try:

                return self.bus.read_word_data(self.address, reg_addr)

            except IOError as e:

                err = e

                #"Rate limiting" - sleeping to prevent problems with sensor

                #when requesting data too quickly

                sleep(self.comm_sleep_amount)

        #By this time, we made a couple requests and the sensor didn't respond

        #(judging by the fact we haven't returned from this function yet)

        #So let's just re-raise the last IOError we got

        raise err

 

    def data_to_temp(self, data):

        temp = (data*0.02) - 273.15

        return temp

 

    def get_amb_temp(self):

        data = self.read_reg(self.MLX90614_TA)

        return self.data_to_temp(data)

 

    def get_obj_temp(self):

        data = self.read_reg(self.MLX90614_TOBJ1)

        return self.data_to_temp(data)

 

 

if __name__ == "__main__":

    sensor = MLX90614()

    print(sensor.get_amb_temp())

    print(sensor.get_obj_temp())

 

example.py

import time

from mlx90614 import MLX90614

 

thermometer_address = 0x5a

 

thermometer = MLX90614(thermometer_address)

while True: 

  print thermometer.get_amb_temp()

  print thermometer.get_obj_temp()

  time.sleep(1.5)

 

 

python2 example.py    即可获得数据

 

 

 

 

 

 

方法2

 

pip3 install adafruit-circuitpython-mlx90614

 

Read_data.py

import board

import adafruit_mlx90614

 

# The MLX90614 only works at the default I2C bus speed of 100kHz.

# A higher speed, such as 400kHz, will not work.

i2c = board.I2C()

mlx = adafruit_mlx90614.MLX90614(i2c)

 

# temperature results in celsius

print("Ambent Temp: ", mlx.ambient_temperature)

print("Object Temp: ", mlx.object_temperature)

 

调用 : python3 Read_data.py

 

 

 

 

 

这篇关于mlx90614红外传感器的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！