keepalived实现lvs高可用
2022/9/2 23:53:00
本文主要是介绍keepalived实现lvs高可用，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！
keeplaived实现lvs高可用
| 名称 | ip |
| node1(lvs,keepalived) | 192.168.6.152 |
| node2(lvs,keepalived) | 192.168.6.153 |
| rs1 | 192.168.6.135 |
| rs2 | 192.168.6.154 |
# 在Rs1，Rs2下载nginx写一个网页文件 [root@rs1 ~]# dnf -y install nginx [root@rs1 ~]# echo 'rs1' > /usr/share/nginx/html/index.html [root@rs1 ~]# systemctl enable --now nginx Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /usr/lib/systemd/system/nginx.service. [root@rs2 ~]# dnf -y install nginx [root@rs2 ~]# echo 'rs2' > /usr/share/nginx/html/index.html [root@rs2 ~]# systemctl enable --now nginx Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /usr/lib/systemd/system/nginx.service.
# 在192.168.6.152 lvs 调度器上配置VIP和DIP
[root@node1 ~]# cd /etc/sysconfig/network-scripts/
[root@node1 network-scripts]# ls
ifcfg-ens160
[root@node1 network-scripts]# vim ifcfg-ens160
TYPE=Ethernet
BOOTPROTO=static
NAME=ens160
DEVICE=ens160
ONBOOT=yes
IPADDR0=192.168.6.152
NETMASK=255.255.255.0
GATEWAY=192.168.6.2
DNS1=114.114.114.114
IPADDR1=192.168.6.250 # 加一个250的vip
NETMASK1=255.255.255.0 #添加一个子网掩码
[root@node1 network-scripts]# ifdown ens160;ifup ens160 # 虽然网卡起来了，但是走不了外网，应为有两个网关，我们可以配本地yum仓库
Connection 'ens160' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/2)
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/3)
[root@node1 network-scripts]# ip a #
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:d7:b0:2d brd ff:ff:ff:ff:ff:ff
inet 192.168.6.152/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
#配置本地yum仓库
[root@node1 ~]# cd /etc/yum.repos.d/
[root@node1 yum.repos.d]# ls
CentOS-Base.repo epel.repo epel-testing.repo
epel-modular.repo epel-testing-modular.repo
[root@node1 yum.repos.d]# mv * /opt/ # 把配好的阿里云的yum源移走
[root@node1 yum.repos.d]# ls
[root@node1 yum.repos.d]# mount /dev/cdrom /mnt/ # 挂载镜像
mount: /mnt: WARNING: device write-protected, mounted read-only.
[root@node1 yum.repos.d]# vi xx.repo # 配置本地源
[appstream]
name=appstream
baseurl=file:///mnt/AppStream
gpgcheck=0
enabled=1
[baseos]
name=baseos
baseurl=file:///mnt/BaseOS
gpgcheck=0
enabled=1
[root@node1 yum.repos.d]# yum clean all
36 files removed
[root@node1 yum.repos.d]# yum makecache
# 在192.168.6.153 lvs 调度器上配置VIP和DIP [root@node2 ~]# cd /etc/sysconfig/network-scripts/ [root@node2 network-scripts]# vim ifcfg-ens160 TYPE=Ethernet BOOTPROTO=static NAME=ens160 DEVICE=ens160 ONBOOT=yes IPADDR0=192.168.6.153 NETMASK=255.255.255.0 GATEWAY=192.168.6.2 DNS1=114.114.114.114 IPADDR1=192.168.6.250 NETMASK1=255.255.255.0 [root@node2 network-scripts]# ifdown ens160;ifup ens160
[root@node2 network-scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:42:d0:bc brd ff:ff:ff:ff:ff:ff
inet 192.168.6.153/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
[root@node2 ~]# cd /etc/yum.repos.d/ [root@node2 yum.repos.d]# ls CentOS-Base.repo epel.repo epel-testing.repo epel-modular.repo epel-testing-modular.repo [root@node2 yum.repos.d]# mv * /opt/ [root@node2 yum.repos.d]# ls
[root@node2 yum.repos.d]# mount /dev/cdrom /mnt/
mount: /mnt: WARNING: device write-protected, mounted read-only.
[root@node2 yum.repos.d]# vi xx.repo
[root@node2 yum.repos.d]# yum clean all
36 files removed
[root@node2 yum.repos.d]# yum makecache
[appstream] name=appstream baseurl=file:///mnt/AppStream gpgcheck=0 enabled=1 [baseos] name=baseos baseurl=file:///mnt/BaseOS gpgcheck=0 enabled=1
#在R1和R2上配置RIP [root@rs1 ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens160 TYPE=Ethernet BOOTPROTO=static NAME=ens160 DEVICE=ens160 ONBOOT=yes IPADDR=192.168.6.135 NETMASK=255.255.255.0 GATEWAY=192.168.6.2 DNS1=114.114.114.114 [root@rs1 ~]# ifdown ens160;ifup ens160 [root@rs2 ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens160 TYPE=Ethernet BOOTPROTO=static NAME=ens160 DEVICE=ens160 ONBOOT=yes IPADDR=192.168.6.154 NETMASK=255.255.255.0 GATEWAY=192.168.6.2 DNS1=114.114.114.114 [root@rs2 ~]# ifdown ens160;ifup ens160
[root@rs1 ~]# vi /etc/sysctl.conf # sysctl settings are defined through files in # /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/. # # Vendors settings live in /usr/lib/sysctl.d/. # To override a whole file, create a new file with the same in # /etc/sysctl.d/ and put new settings there. To override # only specific settings, add a file with a lexically later # name in /etc/sysctl.d/ and put new settings there. # # For more information, see sysctl.conf(5) and sysctl.d(5). net.ipv4.conf.all.arp_ignore = 1 #添加 net.ipv4.conf.all.arp_announce = 2 [root@rs1 ~]# sysctl -p net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 [root@rs2 ~]# vi /etc/sysctl.conf # sysctl settings are defined through files in # /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/. # # Vendors settings live in /usr/lib/sysctl.d/. # To override a whole file, create a new file with the same in # /etc/sysctl.d/ and put new settings there. To override # only specific settings, add a file with a lexically later # name in /etc/sysctl.d/ and put new settings there. # # For more information, see sysctl.conf(5) and sysctl.d(5). net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 [root@rs2 ~]# sysctl -p net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2
#在RS1和RS2上配置VIP
[root@rs1 ~]# yum -y install net-tools
[root@rs1 ~]# ifconfig lo:0 192.168.6.250/32 broadcast 192.168.6.250 up
[root@rs1 ~]# ifconfig lo:0 192.168.6.250/32 broadcast 192.168.6.250 up
[root@rs1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.6.250/0 brd 192.168.6.250 scope global lo:0
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:e2:21:19 brd ff:ff:ff:ff:ff:ff
inet 192.168.6.135/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
[root@rs1 ~]# route add -host 192.168.6.180 dev lo
[root@rs1 ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.6.2 0.0.0.0 UG 100 0 0 ens160
192.168.6.0 0.0.0.0 255.255.255.0 U 100 0 0 ens160
192.168.6.180 0.0.0.0 255.255.255.255 UH 0 0 0 lo
[root@rs2 ~]# yum -y install net-tools
[root@rs2 ~]# ifconfig lo:0 192.168.6.250/32 broadcast 192.168.6.250 up
[root@rs2 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.6.250/0 brd 192.168.6.250 scope global lo:0
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group defaultqlen 1000
link/ether 00:0c:29:bf:50:39 brd ff:ff:ff:ff:ff:ff
inet 192.168.6.154/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
[root@rs2 ~]# route add -host 192.168.6.180 dev lo
[root@rs2 ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.6.2 0.0.0.0 UG 100 0 0 ens160
192.168.6.0 0.0.0.0 255.255.255.0 U 100 0 0 ens160
192.168.6.180 0.0.0.0 255.255.255.255 UH 0 0 0 lo
#node1 node2 添加规则并且保存 [root@node1 ~]# yum -y install ipvsadm [root@node1 ~]# ipvsadm -A -t 192.168.6.250:80 -s rr [root@node1 ~]# ipvsadm -a -t 192.168.6.250:80 -r 192.168.6.135:80 -g [root@node1 ~]# ipvsadm -a -t 192.168.6.250:80 -r 192.168.6.154:80 -g [root@node1 ~]# ipvsadm -ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 192.168.6.250:80 rr -> 192.168.6.135:80 Route 1 0 0 -> 192.168.6.154:80 Route 1 0 0 [root@node1 ~]# ipvsadm -Sn > /etc/sysconfig/ipvsadm [root@node1 ~]# systemctl enable ipvsadm Created symlink /etc/systemd/system/multi-user.target.wants/ipvsadm.service → /usr/lib/systemd/system/ipvsadm.service. [root@node1 ~]# echo "ipvsadm -R < /etc/sysconfig/ipvsadm" >>/etc/rc.d/rc.local [root@node2 yum.repos.d]# yum -y install ipvsadm [root@node2 ~]# ipvsadm -A -t 192.168.6.250:80 -s rr [root@node2 ~]# ipvsadm -a -t 192.168.6.250:80 -r 192.168.6.135:80 -g [root@node2 ~]# ipvsadm -a -t 192.168.6.250:80 -r 192.168.6.154:80 -g [root@node2 ~]# ipvsadm -ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 192.168.6.250:80 rr -> 192.168.6.135:80 Route 1 0 0 -> 192.168.6.154:80 Route 1 0 0 [root@node2 ~]# ipvsadm -Sn > /etc/sysconfig/ipvsadm [root@node2 ~]# echo "ipvsadm -R < /etc/sysconfig/ipvsadm" >>/etc/rc.d/rc.local
下载keepalived配置主keepalived
[root@node1 ~]# dnf -y install keepalived # 下载
[root@node1 ~]# cd /etc/keepalived/
[root@node1 keepalived]# ls
keepalived.conf
[root@node1 keepalived]# cp keepalived.conf{,.aa} #复制一个原本默认的配置文件修改名字备份一下
[root@node1 keepalived]# ls
keepalived.conf keepalived.conf.aa
[root@node1 keepalived]# > keepalived.conf #内容清空
[root@node1 keepalived]# vim keepalived.conf #编辑主配置文件
! Configuration File for keepalived
global_defs { # 全局配置
router_id lb01
}
vrrp_instance VI_1 { #定义实例
state MASTER # 定义keepalived节点的初始状态，可以为MASTER和BACKUP
interface ens160 # VRRP实施绑定的网卡接口，
virtual_router_id 51 # 虚拟路由的ID，同一集群要一致
priority 100 #定义优先级，按优先级来决定主备角色优先级越大越有限
advert_int 1 # 主备通讯时间间隔
authentication { #配置认证
auth_type PASS #认证方式此处为密码
auth_pass 023654 # 修改密码
}
virtual_ipaddress { #要使用的VIP地址
192.168.6.250 # 修改vip
}
}
virtual_server 192.168.6.250 80 { # 配置虚拟服务器
delay_loop 6 # 健康检查时间间隔
lb_algo rr # lvs调度算法
lb_kind DR #lvs模式
persistence_timeout 50 #持久化超时时间，单位是秒
protocol TCP #4层协议
real_server 192.168.6.152 80 { # 定义真实处理请求的服务器
weight 1 # 给服务器指定权重，默认为1
TCP_CHECK {
connect_port 80 #端口号为80
connect_timeout 3 # 连接超时时间
nb_get_retry 3 # 连接次数
delay_before_retry 3 # 在尝试之前延迟多少时间
}
}
real_server 192.168.6.153 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
[root@node1 keepalived]# systemctl enable --now keepalived # 启动并开机自启
Created symlink /etc/systemd/system/multi-user.target.wants/keepalived.service → /usr/lib/systemd/system/keepalived.service.
[root@node1 keepalived]# systemctl status keepalived # 查看状态
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disa>
Active: active (running) since Thu 2022-09-01 23:57:20 CST; 10s ago
Process: 11618 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/>
Main PID: 11620 (keepalived)
Tasks: 3 (limit: 11202)
Memory: 2.1M
CGroup: /system.slice/keepalived.service
├─11620 /usr/sbin/keepalived -D
├─11621 /usr/sbin/keepalived -D
└─11622 /usr/sbin/keepalived -D
下载keepalived配置备keepalived
[root@node2 ~]# dnf -y install keepalived
[root@node2 ~]# cd /etc/keepalived/
[root@node2 keepalived]# ls
keepalived.conf
[root@node2 keepalived]# cp keepalived.conf{,.aa}
[root@node2 keepalived]# > keepalived.conf
[root@node2 keepalived]# vim keepalived.conf
! Configuration File for keepalived
global_defs {
router_id lb02
}
vrrp_instance VI_1 {
state BACKUP
interface ens160
virtual_router_id 51
priority 90
advert_int 1
authentication {
auth_type PASS
auth_pass 023654
}
virtual_ipaddress {
192.168.6.250
}
}
virtual_server 192.168.6.250 80 {
delay_loop 6
lb_algo rr
lb_kind DR
persistence_timeout 50
protocol TCP
real_server 192.168.6.152 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.6.153 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
[root@node2 keepalived]# systemctl enable --now keepalived #启动并设置开机自启
Created symlink /etc/systemd/system/multi-user.target.wants/keepalived.service → /usr/lib/systemd/system/keepalived.service.
[root@node2 keepalived]# systemctl status keepalived # 查看状态
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disa>
Active: active (running) since Fri 2022-09-02 00:02:04 CST; 12s ago
Process: 15241 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/>
Main PID: 15242 (keepalived)
Tasks: 3 (limit: 11202)
Memory: 2.4M
CGroup: /system.slice/keepalived.service
├─15242 /usr/sbin/keepalived -D
├─15243 /usr/sbin/keepalived -D
└─15244 /usr/sbin/keepalived -D
查看VIP在哪里
# 在MASTER上查看
[root@node1 keepalived]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:d7:b0:2d brd ff:ff:ff:ff:ff:ff
inet 192.168.6.152/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/32 scope global ens160 # vip在主节点上
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
#在SLAVE上查看
[root@node2 keepalived]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:42:d0:bc brd ff:ff:ff:ff:ff:ff
inet 192.168.6.153/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
让keepalived监控lvs
keepalived通过脚本来监控lvs的状态
在node1上编写脚本
[root@node1 ~]# mkdir /scripts
[root@node1 ~]# cd /scripts/
[root@node1 scripts]# vim notify.sh
#!/bin/bash
case "$1" in
master)
ipvsadm -R < /etc/sysconfig/ipvsadm
;;
backup)
ipvsadm -C
;;
*)
echo "Usage:$0 master|backup"
;;
esac
[root@node1 scripts]# chmod +x notify.sh
[root@node1 scripts]# ll
total 4
-rwxr-xr-x 1 root root 178 Sep 2 00:43 notify.sh
在node2上编写脚本
[root@node2 keepalived]# vim /etc/keepalived/keepalived.conf
[root@node2 keepalived]# mkdir /scripts
[root@node2 keepalived]# cd /scripts/
[root@node2 scripts]# vim notify.sh
#!/bin/bash
case "$1" in
master)
ipvsadm -R < /etc/sysconfig/ipvsadm
;;
backup)
ipvsadm -C
;;
*)
echo "Usage:$0 master|backup"
;;
esac
[root@node2 scripts]# chmod +x notify.sh
[root@node2 scripts]# ll
total 4
-rwxr-xr-x 1 root root 178 Sep 2 00:47 notify.sh
配置keepalived加入监控脚本的配置
配置node1上的keepalived
加入脚本
[root@node1 scripts]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id lb01
}
vrrp_instance VI_1 {
state BACKUP #不抢占此处都为备 ，如果设置抢占把两边的nopreempt都删除掉，此处改为MASTER为主
interface ens160
virtual_router_id 51
priority 100
nopreempt # 设置的不抢占，
advert_int 1
authentication {
auth_type PASS
auth_pass 023654
}
virtual_ipaddress {
192.168.6.250
}
notify_master "/scripts/notify.sh master 192.168.6.250"
notify_backup "/scripts/notify.sh backup 192.168.6.250"
}
virtual_server 192.168.6.250 80 {
delay_loop 6
lb_algo rr
lb_kind DR
persistence_timeout 50
protocol TCP
real_server 192.168.6.152 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.6.153 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
[root@node1 scripts]# systemctl restart keepalived
[root@node1 scripts]# systemctl status keepalived
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disa>
Active: active (running) since Fri 2022-09-02 00:57:07 CST; 9s ago
Process: 11678 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/>
Main PID: 11679 (keepalived)
Tasks: 3 (limit: 11202)
Memory: 3.0M
CGroup: /system.slice/keepalived.service
├─11679 /usr/sbin/keepalived -D
├─11680 /usr/sbin/keepalived -D
└─11681 /usr/sbin/keepalived -D
配置node2上的keepalived
加入脚本
[root@node2 scripts]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id lb02
}
vrrp_instance VI_1 {
state BACKUP # 不抢占模式必须都为备
interface ens160
virtual_router_id 51
priority 90
nopreempt # 不抢占
advert_int 1
authentication {
auth_type PASS
auth_pass 023654
}
virtual_ipaddress {
192.168.6.250
}
notify_master "/scripts/notify.sh master 192.168.6.250"
notify_backup "/scripts/notify.sh backup 192.168.6.250"
}
}
virtual_server 192.168.6.250 80 {
delay_loop 6
lb_algo rr
lb_kind DR
persistence_timeout 50
protocol TCP
real_server 192.168.6.152 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.6.153 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
[root@node2 scripts]# systemctl restart keepalived
[root@node2 scripts]# systemctl status keepalived
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disa>
Active: active (running) since Fri 2022-09-02 00:57:58 CST; 8s ago
Process: 15273 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/>
Main PID: 15274 (keepalived)
Tasks: 3 (limit: 11202)
Memory: 3.2M
CGroup: /system.slice/keepalived.service
├─15274 /usr/sbin/keepalived -D
├─15276 /usr/sbin/keepalived -D
└─15277 /usr/sbin/keepalived -D
验证，模拟node1出现故障，此处是不抢占模式
# 先查看状态node1，vip还在手里
[root@node1 scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:d7:b0:2d brd ff:ff:ff:ff:ff:ff
inet 192.168.6.152/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/32 scope global ens160 # vip
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
#查看node2，没有vip
[root@node2 scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:42:d0:bc brd ff:ff:ff:ff:ff:ff
inet 192.168.6.153/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
# 关掉node1
[root@node1 scripts]# init 0
#查看node2,在node1出现故障的时候抢占了vip成为主，继续让服务运行，从而达到主备故障切换
[root@node2 scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:42:d0:bc brd ff:ff:ff:ff:ff:ff
inet 192.168.6.153/24 brd 192.168.6.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.6.250/32 scope global ens160 # 有vip了
valid_lft forever preferred_lft forever
inet 192.168.6.250/24 brd 192.168.6.255 scope global secondary noprefixroute ens160
valid_lft forever preferred_lft forever
这篇关于keepalived实现lvs高可用的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！
- 2024-05-20测试人员都是画画大神，让我看看谁还不会用代码图？
- 2024-05-20年薪百万的程序员都在用的摸鱼方式……
- 2024-05-19永别了，微服务架构！
- 2024-05-15鸿蒙生态设备数量超8亿台
- 2024-05-13TiDB + ES：转转业财系统亿级数据存储优化实践
- 2024-05-09“2024鸿蒙零基础快速实战-仿抖音App开发（ArkTS版）”实战课程已上线
- 2024-05-09聊聊如何通过arthas-tunnel-server来远程管理所有需要arthas监控的应用
- 2024-05-09log4j2这么配就对了
- 2024-05-09nginx修改Content-Type
- 2024-05-09Redis多数据源，看这篇就够了
