驱动开发：内核RIP劫持实现DLL注入
2023/6/16 14:23:44
本文主要是介绍驱动开发：内核RIP劫持实现DLL注入，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！
本章将探索内核级DLL模块注入实现原理，DLL模块注入在应用层中通常会使用CreateRemoteThread直接开启远程线程执行即可，驱动级别的注入有多种实现原理，而其中最简单的一种实现方式则是通过劫持EIP的方式实现，其实现原理可总结为，挂起目标进程，停止目标进程EIP的变换，在目标进程开启空间，并把相关的指令机器码和数据拷贝到里面去，然后直接修改目标进程EIP使其强行跳转到我们拷贝进去的相关机器码位置，执行相关代码后，然后再次跳转回来执行原始指令集。
在内核模式中实现这一过程大体可分为如下步骤；
- 1.通过
PsLookupProcessByProcessId将进程PID转为EProcess结构 - 2.通过
KeStackAttachProcess附加到目标进程 - 3.通过
GetUserModule得到当前进程中Ntdll.dll模块的基址 - 4.通过
GetModuleExport得到Ntdll.dll模块内LdrLoadDll函数基址 - 5.通过
ZwGetNextThread得到当前线程句柄 - 6.通过
PsSuspendThread暂停当前线程运行 - 7.此时通过
GetWow64Code生成特定的加载代码，并放入ZwAllocateVirtualMemory生成的内存中 - 8.修改当前EIP的值指向
newAddress内存地址 - 7.通过
PsResumeThread恢复线程执行，让其执行我们的ShellCode代码 - 8.最后调用
KeUnstackDetachProcess脱离目标进程，并释放句柄
首先需要定义一个标准头文件，并将其命名为lyshark.h其定义部分如下所示，此部分内容摘录于微软官方文档，如果需要了解结构体内的含义，请去自行查阅微软官方文档；
// 署名权
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: me@lyshark.com
#include <ntifs.h>
#include <windef.h>
#include <intrin.h>
#include <ntimage.h>
#include <ntstrsafe.h>
// 线程结构体偏移值
#define MAXCOUNTS 0x200
#define INITIALSTACKOFFSET 0x28
#define WOW64CONTEXTOFFSET 0x1488
#define WOW64_SIZE_OF_80387_REGISTERS 80
#define WOW64_MAXIMUM_SUPPORTED_EXTENSION 512
// 导出函数
NTKERNELAPI PPEB NTAPI PsGetProcessPeb(IN PEPROCESS Process);
// 定义自定义函数指针
typedef PVOID(NTAPI* PPsGetThreadTeb)(IN PETHREAD Thread);
typedef PVOID(NTAPI* PPsGetProcessWow64Process)(_In_ PEPROCESS Process);
typedef NTSTATUS(NTAPI* PPsResumeThread)(PETHREAD Thread, OUT PULONG PreviousCount);
typedef NTSTATUS(NTAPI* PPsSuspendThread)(IN PETHREAD Thread, OUT PULONG PreviousSuspendCount OPTIONAL);
typedef NTSTATUS(NTAPI* PZwGetNextThread)(_In_ HANDLE ProcessHandle, _In_ HANDLE ThreadHandle, _In_ ACCESS_MASK DesiredAccess, _In_ ULONG HandleAttributes, _In_ ULONG Flags, _Out_ PHANDLE NewThreadHandle);
// 存放全局函数指针的变量
PPsGetThreadTeb g_PsGetThreadTeb = NULL;
PPsResumeThread g_PsResumeThread = NULL;
PPsSuspendThread g_PsSuspendThread = NULL;
PZwGetNextThread g_ZwGetNextThread = NULL;
PPsGetProcessWow64Process g_PsGetProcessWow64Process = NULL;
// 定义微软结构体
typedef struct _PEB_LDR_DATA32
{
ULONG Length;
UCHAR Initialized;
ULONG SsHandle;
LIST_ENTRY32 InLoadOrderModuleList;
LIST_ENTRY32 InMemoryOrderModuleList;
LIST_ENTRY32 InInitializationOrderModuleList;
} PEB_LDR_DATA32, *PPEB_LDR_DATA32;
typedef struct _PEB_LDR_DATA
{
ULONG Length;
UCHAR Initialized;
PVOID SsHandle;
LIST_ENTRY InLoadOrderModuleList;
LIST_ENTRY InMemoryOrderModuleList;
LIST_ENTRY InInitializationOrderModuleList;
} PEB_LDR_DATA, *PPEB_LDR_DATA;
typedef struct _LDR_DATA_TABLE_ENTRY32
{
LIST_ENTRY32 InLoadOrderLinks;
LIST_ENTRY32 InMemoryOrderLinks;
LIST_ENTRY32 InInitializationOrderLinks;
ULONG DllBase;
ULONG EntryPoint;
ULONG SizeOfImage;
UNICODE_STRING32 FullDllName;
UNICODE_STRING32 BaseDllName;
ULONG Flags;
USHORT LoadCount;
USHORT TlsIndex;
LIST_ENTRY32 HashLinks;
ULONG TimeDateStamp;
} LDR_DATA_TABLE_ENTRY32, *PLDR_DATA_TABLE_ENTRY32;
typedef struct _LDR_DATA_TABLE_ENTRY
{
LIST_ENTRY InLoadOrderLinks;
LIST_ENTRY InMemoryOrderLinks;
LIST_ENTRY InInitializationOrderLinks;
PVOID DllBase;
PVOID EntryPoint;
ULONG SizeOfImage;
UNICODE_STRING FullDllName;
UNICODE_STRING BaseDllName;
ULONG Flags;
USHORT LoadCount;
USHORT TlsIndex;
LIST_ENTRY HashLinks;
ULONG TimeDateStamp;
} LDR_DATA_TABLE_ENTRY, *PLDR_DATA_TABLE_ENTRY;
typedef struct _PEB32
{
UCHAR InheritedAddressSpace;
UCHAR ReadImageFileExecOptions;
UCHAR BeingDebugged;
UCHAR BitField;
ULONG Mutant;
ULONG ImageBaseAddress;
ULONG Ldr;
ULONG ProcessParameters;
ULONG SubSystemData;
ULONG ProcessHeap;
ULONG FastPebLock;
ULONG AtlThunkSListPtr;
ULONG IFEOKey;
ULONG CrossProcessFlags;
ULONG UserSharedInfoPtr;
ULONG SystemReserved;
ULONG AtlThunkSListPtr32;
ULONG ApiSetMap;
} PEB32, *PPEB32;
typedef struct _PEB
{
UCHAR InheritedAddressSpace;
UCHAR ReadImageFileExecOptions;
UCHAR BeingDebugged;
UCHAR BitField;
PVOID Mutant;
PVOID ImageBaseAddress;
PPEB_LDR_DATA Ldr;
PVOID ProcessParameters;
PVOID SubSystemData;
PVOID ProcessHeap;
PVOID FastPebLock;
PVOID AtlThunkSListPtr;
PVOID IFEOKey;
PVOID CrossProcessFlags;
PVOID KernelCallbackTable;
ULONG SystemReserved;
ULONG AtlThunkSListPtr32;
PVOID ApiSetMap;
} PEB, *PPEB;
typedef struct _KLDR_DATA_TABLE_ENTRY
{
LIST_ENTRY InLoadOrderLinks;
PVOID ExceptionTable;
ULONG ExceptionTableSize;
PVOID GpValue;
ULONG UnKnow;
PVOID DllBase;
PVOID EntryPoint;
ULONG SizeOfImage;
UNICODE_STRING FullDllName;
UNICODE_STRING BaseDllName;
ULONG Flags;
USHORT LoadCount;
USHORT __Unused5;
PVOID SectionPointer;
ULONG CheckSum;
PVOID LoadedImports;
PVOID PatchInformation;
} KLDR_DATA_TABLE_ENTRY, *PKLDR_DATA_TABLE_ENTRY;
typedef struct _WOW64_FLOATING_SAVE_AREA
{
DWORD ControlWord;
DWORD StatusWord;
DWORD TagWord;
DWORD ErrorOffset;
DWORD ErrorSelector;
DWORD DataOffset;
DWORD DataSelector;
BYTE RegisterArea[WOW64_SIZE_OF_80387_REGISTERS];
DWORD Cr0NpxState;
} WOW64_FLOATING_SAVE_AREA;
typedef struct _WOW64_CONTEXT
{
DWORD padding;
DWORD ContextFlags;
DWORD Dr0;
DWORD Dr1;
DWORD Dr2;
DWORD Dr3;
DWORD Dr6;
DWORD Dr7;
WOW64_FLOATING_SAVE_AREA FloatSave;
DWORD SegGs;
DWORD SegFs;
DWORD SegEs;
DWORD SegDs;
DWORD Edi;
DWORD Esi;
DWORD Ebx;
DWORD Edx;
DWORD Ecx;
DWORD Eax;
DWORD Ebp;
DWORD Eip;
DWORD SegCs;
DWORD EFlags;
DWORD Esp;
DWORD SegSs;
BYTE ExtendedRegisters[WOW64_MAXIMUM_SUPPORTED_EXTENSION];
} WOW64_CONTEXT, *PWOW64_CONTEXT;
// 自定义注入结构体
typedef struct _INJECT_BUFFER
{
UCHAR Code[0x200];
UNICODE_STRING Path;
UNICODE_STRING32 Path32;
wchar_t Buffer[488];
PVOID ModuleHandle;
ULONG Complete;
NTSTATUS Status;
ULONG64 orgRipAddress;
ULONG64 orgRip;
} INJECT_BUFFER, *PINJECT_BUFFER;
SearchOPcode 特征码定位基址: 在注入之前我们需要通过SearchOPcode()函数动态的寻找几个关键函数的基址，以PsSuspendThread函数的寻找为例，通过WinDBG我们可以定位到该函数，该函数模块在ntoskrnl.exe中，且无法直接通过MmGetSystemRoutineAddress拿到，为了能通过代码拿到该函数的入口地址，我提取fffff804204de668到fffff804204de670位置处的特征码，由于fffff804204de668距离PsSuspendThread函数开头只有24字节，所以直接通过-24即可得到。
通过调用SearchOPcode()并传入机器码即可直接拿到PsSuspendThread的入口地址，根据上述方式我们需要分别得到PsSuspendThread，PsResumeThread这几个函数的内存基址，这些函数的具体作用如下所示；
- PsSuspendThread() 用于暂停或者挂起线程
- PsResumeThread() 用于恢复线程
其次还需要通过MmGetSystemRoutineAddress函数动态的得到ZwGetNextThread，PsGetThreadTeb，PsGetProcessWow64Process这几个函数的基址，这些函数的具体作用如下所示；
- ZwGetNextThread() 用于获取下一个活动线程
- PsGetThreadTeb() 用于获取线程TEB结构
- PsGetProcessWow64Process() 判断当前进程是否为32位
完整代码如下所示，运行这段代码将定位到我们所需的所有内核函数的基址信息；
// 署名权
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: me@lyshark.com
#include "lyshark.h"
// 内核特征码定位函数封装
// 参数1：传入驱动句柄
// 参数2：传入驱动模块名
// 参数3：传入节表名称
// 参数4：传入待搜索机器码字节数组
// 参数5：传入机器码长度
// 参数6：基址修正字节数
PVOID SearchOPcode(PDRIVER_OBJECT pObj, PWCHAR DriverName, PCHAR sectionName, PUCHAR opCode, DWORD len, DWORD offset)
{
PVOID dllBase = NULL;
UNICODE_STRING uniDriverName;
PKLDR_DATA_TABLE_ENTRY firstentry;
// 获取驱动入口
PKLDR_DATA_TABLE_ENTRY entry = (PKLDR_DATA_TABLE_ENTRY)pObj->DriverSection;
firstentry = entry;
RtlInitUnicodeString(&uniDriverName, DriverName);
// 开始遍历
while ((PKLDR_DATA_TABLE_ENTRY)entry->InLoadOrderLinks.Flink != firstentry)
{
if (entry->FullDllName.Buffer != 0 && entry->BaseDllName.Buffer != 0)
{
// 如果找到了所需模块则将其基地址返回
if (RtlCompareUnicodeString(&uniDriverName, &(entry->BaseDllName), FALSE) == 0)
{
dllBase = entry->DllBase;
break;
}
}
entry = (PKLDR_DATA_TABLE_ENTRY)entry->InLoadOrderLinks.Flink;
}
if (dllBase)
{
__try
{
// 载入模块基地址
PIMAGE_DOS_HEADER ImageDosHeader = (PIMAGE_DOS_HEADER)dllBase;
if (ImageDosHeader->e_magic != IMAGE_DOS_SIGNATURE)
{
return NULL;
}
// 得到模块NT头以及Section节头
PIMAGE_NT_HEADERS64 pImageNtHeaders64 = (PIMAGE_NT_HEADERS64)((PUCHAR)dllBase + ImageDosHeader->e_lfanew);
PIMAGE_SECTION_HEADER pSectionHeader = (PIMAGE_SECTION_HEADER)((PUCHAR)pImageNtHeaders64 + sizeof(pImageNtHeaders64->Signature) + sizeof(pImageNtHeaders64->FileHeader) + pImageNtHeaders64->FileHeader.SizeOfOptionalHeader);
PUCHAR endAddress = 0;
PUCHAR starAddress = 0;
// 寻找符合条件的节
for (int i = 0; i < pImageNtHeaders64->FileHeader.NumberOfSections; i++)
{
if (memcmp(sectionName, pSectionHeader->Name, strlen(sectionName) + 1) == 0)
{
starAddress = pSectionHeader->VirtualAddress + (PUCHAR)dllBase;
endAddress = pSectionHeader->VirtualAddress + (PUCHAR)dllBase + pSectionHeader->SizeOfRawData;
break;
}
pSectionHeader++;
}
if (endAddress && starAddress)
{
// 找到会开始寻找特征
for (; starAddress < endAddress - len - 1; starAddress++)
{
// 验证访问权限
if (MmIsAddressValid(starAddress))
{
DWORD i = 0;
for (; i < len; i++)
{
// 判断是否为通配符'*'
if (opCode[i] == 0x2a)
{
continue;
}
// 找到了一个字节则跳出
if (opCode[i] != starAddress[i])
{
break;
}
}
// 找到次数完全匹配则返回地址
if (i == len)
{
return starAddress + offset;
}
}
}
}
}
__except (EXCEPTION_EXECUTE_HANDLER) {}
}
return NULL;
}
NTSTATUS UnDriver(PDRIVER_OBJECT driver)
{
return STATUS_SUCCESS;
}
NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
DbgPrint("Hello LyShark.com \n");
/*
0: kd> uf PsSuspendThread
nt!PsSuspendThread:
fffff804`204de650 4889542410 mov qword ptr [rsp+10h],rdx
fffff804`204de655 48894c2408 mov qword ptr [rsp+8],rcx
fffff804`204de65a 53 push rbx
fffff804`204de65b 56 push rsi
fffff804`204de65c 57 push rdi
fffff804`204de65d 4156 push r14
fffff804`204de65f 4157 push r15
fffff804`204de661 4883ec30 sub rsp,30h
fffff804`204de665 4c8bf2 mov r14,rdx
fffff804`204de668 488bf9 mov rdi,rcx
fffff804`204de66b 8364242000 and dword ptr [rsp+20h],0
fffff804`204de670 65488b342588010000 mov rsi,qword ptr gs:[188h]
fffff804`204de679 4889742470 mov qword ptr [rsp+70h],rsi
fffff804`204de67e 66ff8ee4010000 dec word ptr [rsi+1E4h]
fffff804`204de685 4c8db9c8060000 lea r15,[rcx+6C8h]
fffff804`204de68c 4c897c2478 mov qword ptr [rsp+78h],r15
fffff804`204de691 498bcf mov rcx,r15
fffff804`204de694 e8c7ff95ff call nt!ExAcquireRundownProtection (fffff804`1fe3e660)
fffff804`204de699 84c0 test al,al
fffff804`204de69b 0f84495a1100 je nt!PsSuspendThread+0x115a9a (fffff804`205f40ea) Branch
*/
UCHAR SuspendOpCode[] = { 0x48, 0x8b, 0xf9, 0x83, 0x64, 0x24, 0x20, 0x00, 0x65, 0x48, 0x8b, 0x34, 0x25, 0x88, 0x01 };
/*
0: kd> uf PsResumeThread
nt!PsResumeThread:
fffff804`204c7ab0 48895c2408 mov qword ptr [rsp+8],rbx
fffff804`204c7ab5 4889742410 mov qword ptr [rsp+10h],rsi
fffff804`204c7aba 57 push rdi
fffff804`204c7abb 4883ec20 sub rsp,20h
fffff804`204c7abf 488bda mov rbx,rdx
fffff804`204c7ac2 488bf9 mov rdi,rcx
fffff804`204c7ac5 e8ee4fa5ff call nt!KeResumeThread (fffff804`1ff1cab8)
fffff804`204c7aca 65488b142588010000 mov rdx,qword ptr gs:[188h]
fffff804`204c7ad3 8bf0 mov esi,eax
fffff804`204c7ad5 83f801 cmp eax,1
fffff804`204c7ad8 7521 jne nt!PsResumeThread+0x4b (fffff804`204c7afb) Branch
*/
UCHAR ResumeOpCode[] = { 0x48, 0x8b, 0xf9, 0xe8, 0xee, 0x4f, 0xa5, 0xff, 0x65, 0x48, 0x8b, 0x14, 0x25, 0x88 };
// 特征码检索PsSuspendThread函数基址
g_PsSuspendThread = (PPsSuspendThread)SearchOPcode(Driver, L"ntoskrnl.exe", "PAGE", SuspendOpCode, sizeof(SuspendOpCode), -24);
DbgPrint("PsSuspendThread = %p \n", g_PsSuspendThread);
// 特征码检索PsResumeThread基址
g_PsResumeThread = (PPsResumeThread)SearchOPcode(Driver, L"ntoskrnl.exe", "PAGE", ResumeOpCode, sizeof(ResumeOpCode), -18);
DbgPrint("PsResumeThread = %p \n", g_PsResumeThread);
// 动态获取内存中的ZwGetNextThread基址
UNICODE_STRING ZwGetNextThreadString = RTL_CONSTANT_STRING(L"ZwGetNextThread");
g_ZwGetNextThread = (PZwGetNextThread)MmGetSystemRoutineAddress(&ZwGetNextThreadString);
DbgPrint("ZwGetNextThread = %p \n", g_ZwGetNextThread);
// 动态获取内存中的PsGetThreadTeb基址
UNICODE_STRING PsGetThreadTebString = RTL_CONSTANT_STRING(L"PsGetThreadTeb");
g_PsGetThreadTeb = (PPsGetThreadTeb)MmGetSystemRoutineAddress(&PsGetThreadTebString);
DbgPrint("PsGetThreadTeb = %p \n", g_PsGetThreadTeb);
// 动态获取内存中的PsGetProcessWow64Process基址
UNICODE_STRING PsGetProcessWow64ProcessString = RTL_CONSTANT_STRING(L"PsGetProcessWow64Process");
g_PsGetProcessWow64Process = (PPsGetProcessWow64Process)MmGetSystemRoutineAddress(&PsGetProcessWow64ProcessString);
DbgPrint("PsGetProcessWow64Process = %p \n", g_PsGetProcessWow64Process);
Driver->DriverUnload = UnDriver;
return STATUS_SUCCESS;
}
编译并运行如上代码片段，则会输出我们所需函数的入口地址，输出效果图如下所示；
GetUserModule 获取模块基址: 此函数的功能是获取到当前内核下特定模块的基址，函数接收三个参数，在入口DriverEntry位置通过KeStackAttachProcess附加到进程空间内，如果是32位进程则通过PsGetProcessWow64Process得到进程的PEB结构，如果是64位则通过PsGetProcessPeb得到PEB进程环境块的目的是为了解析PLIST_ENTRY32链表，通过RtlCompareUnicodeString对比模块是否符合要求，如果符合则在此链表中取出LdrDataTableEntry32->DllBase模块基址并返回给调用者，其完整代码片段如下所示；
- 1.通过
KeStackAttachProcess附加到用户层进程空间内 - 2.通过各种函数获取到进程
PEB进程环境块 - 3.遍历
PLIST_ENTRY32链表，判断ModuleName是否所需 - 4.获取
LdrDataTableEntry32->DllBase中的模块基址
// 署名权
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: me@lyshark.com
#include "lyshark.h"
// 得到当前用户进程下的模块基址
// 参数1：传入用户EProcess结构
// 参数2：传入模块名
// 参数3：是否32位
PVOID GetUserModule(IN PEPROCESS EProcess, IN PUNICODE_STRING ModuleName, IN BOOLEAN IsWow64)
{
if (EProcess == NULL)
return NULL;
__try
{
// 执行32位
if (IsWow64)
{
// 获取32位下的PEB进程环境块
PPEB32 Peb32 = (PPEB32)g_PsGetProcessWow64Process(EProcess);
if (Peb32 == NULL)
return NULL;
if (!Peb32->Ldr)
return NULL;
// 循环遍历链表 寻找模块
for (PLIST_ENTRY32 ListEntry = (PLIST_ENTRY32)((PPEB_LDR_DATA32)Peb32->Ldr)->InLoadOrderModuleList.Flink;
ListEntry != &((PPEB_LDR_DATA32)Peb32->Ldr)->InLoadOrderModuleList;
ListEntry = (PLIST_ENTRY32)ListEntry->Flink)
{
UNICODE_STRING UnicodeString;
PLDR_DATA_TABLE_ENTRY32 LdrDataTableEntry32 = CONTAINING_RECORD(ListEntry, LDR_DATA_TABLE_ENTRY32, InLoadOrderLinks);
// 初始化模块名
RtlUnicodeStringInit(&UnicodeString, (PWCH)LdrDataTableEntry32->BaseDllName.Buffer);
// 对比模块名是否符合
if (RtlCompareUnicodeString(&UnicodeString, ModuleName, TRUE) == 0)
return (PVOID)LdrDataTableEntry32->DllBase;
}
}
// 执行64位
else
{
// 得到64位PEB进程环境块
PPEB Peb = PsGetProcessPeb(EProcess);
if (!Peb)
return NULL;
if (!Peb->Ldr)
return NULL;
// 开始遍历模块
for (PLIST_ENTRY ListEntry = Peb->Ldr->InLoadOrderModuleList.Flink;
ListEntry != &Peb->Ldr->InLoadOrderModuleList;
ListEntry = ListEntry->Flink)
{
// 得到表头
PLDR_DATA_TABLE_ENTRY LdrDataTableEntry = CONTAINING_RECORD(ListEntry, LDR_DATA_TABLE_ENTRY, InLoadOrderLinks);
// 判断是否是所需要的模块
if (RtlCompareUnicodeString(&LdrDataTableEntry->BaseDllName, ModuleName, TRUE) == 0)
return LdrDataTableEntry->DllBase;
}
}
}
__except (EXCEPTION_EXECUTE_HANDLER){}
return NULL;
}
NTSTATUS UnDriver(PDRIVER_OBJECT driver)
{
return STATUS_SUCCESS;
}
NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
DbgPrint("Hello LyShark.com \n");
// 动态获取内存中的PsGetProcessWow64Process基址
UNICODE_STRING PsGetProcessWow64ProcessString = RTL_CONSTANT_STRING(L"PsGetProcessWow64Process");
g_PsGetProcessWow64Process = (PPsGetProcessWow64Process)MmGetSystemRoutineAddress(&PsGetProcessWow64ProcessString);
DbgPrint("PsGetProcessWow64Process = %p \n", g_PsGetProcessWow64Process);
PEPROCESS pEprocess = NULL;
DWORD pid = 6084;
// 根据PID得到进程Eprocess结构
if (NT_SUCCESS(PsLookupProcessByProcessId((HANDLE)pid, &pEprocess)))
{
// 初始化结构
UNICODE_STRING ntdllString = RTL_CONSTANT_STRING(L"Ntdll.dll");
KAPC_STATE kApc = { 0 };
// 附加到进程内
KeStackAttachProcess(pEprocess, &kApc);
// 获取NTDLL的模块基地址
PVOID ntdll_address = GetUserModule(pEprocess, &ntdllString, TRUE);
if (ntdll_address != NULL)
{
DbgPrint("[*] Ntdll Addr = %p \n", ntdll_address);
}
// 取消附加
KeUnstackDetachProcess(&kApc);
// 递减计数
ObDereferenceObject(pEprocess);
}
Driver->DriverUnload = UnDriver;
return STATUS_SUCCESS;
}
运行如上这段程序，则会取出进程ID为6084中Ntdll.dll的模块基址，输出效果图如下所示；
GetModuleExport 取导出表函数基址: 此函数的功能是获取到当前内核下特定模块中的特定函数（内存中）基址，函数接收两个参数，在入口DriverEntry位置通过KeStackAttachProcess附加到进程空间内，通过解析IMAGE_DIRECTORY_ENTRY_EXPORT导出表取出导出函数名，此处需要注意如果函数名指针小于等于0xFFFF则说明是序号导出，如果大于0xFFFF则说明是名字导出，判断名字是否一致，如果一致则返回当前内存的ModuleBase模块基址加上pAddressOfFuncs[OrdIndex]相对偏移，从而获取到内存中的绝对地址，完整代码片段如下所示；
// 署名权
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: me@lyshark.com
#include "lyshark.h"
// 根据函数名得到导出表地址
// 参数1：传入模块入口地址
// 参数2：传入导出函数名
PVOID GetModuleExport(IN PVOID ModuleBase, IN PCCHAR FunctionName)
{
PIMAGE_DOS_HEADER ImageDosHeader = (PIMAGE_DOS_HEADER)ModuleBase;
PIMAGE_NT_HEADERS32 ImageNtHeaders32 = NULL;
PIMAGE_NT_HEADERS64 ImageNtHeaders64 = NULL;
PIMAGE_EXPORT_DIRECTORY ImageExportDirectory = NULL;
ULONG ExportDirectorySize = 0;
ULONG_PTR FunctionAddress = 0;
if (ModuleBase == NULL)
return NULL;
__try
{
// 判断是否是DOS头
if (ImageDosHeader->e_magic != IMAGE_DOS_SIGNATURE)
{
return NULL;
}
// 获取PE结构节NT头
ImageNtHeaders32 = (PIMAGE_NT_HEADERS32)((PUCHAR)ModuleBase + ImageDosHeader->e_lfanew);
ImageNtHeaders64 = (PIMAGE_NT_HEADERS64)((PUCHAR)ModuleBase + ImageDosHeader->e_lfanew);
// 判断是否是64位
if (ImageNtHeaders64->OptionalHeader.Magic == IMAGE_NT_OPTIONAL_HDR64_MAGIC)
{
// 如果是64位则执行如下
ImageExportDirectory = (PIMAGE_EXPORT_DIRECTORY)(ImageNtHeaders64->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress + (ULONG_PTR)ModuleBase);
ExportDirectorySize = ImageNtHeaders64->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size;
}
else
{
// 如果32位则执行如下
ImageExportDirectory = (PIMAGE_EXPORT_DIRECTORY)(ImageNtHeaders32->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress + (ULONG_PTR)ModuleBase);
ExportDirectorySize = ImageNtHeaders32->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size;
}
// 取出导出表Index，名字，函地址等
PUSHORT pAddressOfOrds = (PUSHORT)(ImageExportDirectory->AddressOfNameOrdinals + (ULONG_PTR)ModuleBase);
PULONG pAddressOfNames = (PULONG)(ImageExportDirectory->AddressOfNames + (ULONG_PTR)ModuleBase);
PULONG pAddressOfFuncs = (PULONG)(ImageExportDirectory->AddressOfFunctions + (ULONG_PTR)ModuleBase);
// 循环导出表
for (ULONG i = 0; i < ImageExportDirectory->NumberOfFunctions; ++i)
{
USHORT OrdIndex = 0xFFFF;
PCHAR pName = NULL;
// 说明是序号导出
if ((ULONG_PTR)FunctionName <= 0xFFFF)
{
// 得到函数序号
OrdIndex = (USHORT)i;
}
// 说明是名字导出
else if ((ULONG_PTR)FunctionName > 0xFFFF && i < ImageExportDirectory->NumberOfNames)
{
// 得到函数名
pName = (PCHAR)(pAddressOfNames[i] + (ULONG_PTR)ModuleBase);
OrdIndex = pAddressOfOrds[i];
}
else
return NULL;
// 判断函数名是否符合
if (((ULONG_PTR)FunctionName <= 0xFFFF && (USHORT)((ULONG_PTR)FunctionName) == OrdIndex + ImageExportDirectory->Base) ||
((ULONG_PTR)FunctionName > 0xFFFF && strcmp(pName, FunctionName) == 0))
{
// 得到完整地址
FunctionAddress = pAddressOfFuncs[OrdIndex] + (ULONG_PTR)ModuleBase;
break;
}
}
}
__except (EXCEPTION_EXECUTE_HANDLER){}
return (PVOID)FunctionAddress;
}
NTSTATUS UnDriver(PDRIVER_OBJECT driver)
{
return STATUS_SUCCESS;
}
NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
DbgPrint("Hello LyShark.com \n");
PEPROCESS pEprocess = NULL;
DWORD pid = 6084;
// 根据PID得到进程Eprocess结构
if (NT_SUCCESS(PsLookupProcessByProcessId((HANDLE)pid, &pEprocess)))
{
KAPC_STATE kApc = { 0 };
// ntdll.dll模块基址
PVOID ntdll_address = (PVOID)0x0000000077540000;
// 附加到进程内
KeStackAttachProcess(pEprocess, &kApc);
// 取模块中LdrLoadDll函数基址
PVOID LdrLoadDllAddress = GetModuleExport(ntdll_address, "LdrLoadDll");
DbgPrint("[*] LdrLoadDllAddress = %p \n", LdrLoadDllAddress);
// 取消附加
KeUnstackDetachProcess(&kApc);
// 递减计数
ObDereferenceObject(pEprocess);
}
Driver->DriverUnload = UnDriver;
return STATUS_SUCCESS;
}
编译并运行如上代码片段，即可获取到进程6084号，ntdll.dll模块中LdrLoadDll的内存地址，其输出效果图如下所示；
GetCurrentContext 获取当前线程上下文: 此函数的功能是获取附加进程内当前线程的上下文地址，函数接收一个参数，内部通过PsLookupProcessByProcessId得到进程EProcess结构体，通过KeStackAttachProcess附加到进程内，调用g_ZwGetNextThread获取当当前线程上下文，函数ObReferenceObjectByHandle用于将Handle转换为线程对象，之后再通过g_PsSuspendThread暂停线程后，即可通过各类函数获取到该线程的绝大部分信息，最终在调用结束时记得调用g_PsResumeThread恢复线程的运行，并KeUnstackDetachProcess脱离附加，解析上下文环境完整代码如下所示；
// 署名权
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: me@lyshark.com
#include "lyshark.h"
// ShellCode 注入线程函数
NTSTATUS GetCurrentContext(ULONG pid, PVOID* allcateAddress)
{
PEPROCESS pEprocess = NULL;
// 根据PID得到进程Eprocess结构
if (NT_SUCCESS(PsLookupProcessByProcessId((HANDLE)pid, &pEprocess)))
{
KAPC_STATE kApc = { 0 };
// 附加到进程内
KeStackAttachProcess(pEprocess, &kApc);
HANDLE threadHandle = NULL;
// 得到当前正在运行的线程上下文
if (NT_SUCCESS(g_ZwGetNextThread((HANDLE)-1, (HANDLE)0, 0x1FFFFF, 0x240, 0, &threadHandle)))
{
PVOID threadObj = NULL;
// 在对象句柄上提供访问验证，如果可以授予访问权限，则返回指向对象的正文的相应指针。
NTSTATUS state = ObReferenceObjectByHandle(threadHandle, 0x1FFFFF, *PsThreadType, KernelMode, &threadObj, NULL);
if (NT_SUCCESS(state))
{
// 暂停线程
g_PsSuspendThread(threadObj, NULL);
__try
{
// 得到TEB
PVOID pTeb = g_PsGetThreadTeb(threadObj);
if (pTeb)
{
DbgPrint("[+] 线程环境块TEB = %p \n", pTeb);
// 得到当前线程上下文
/* WOW64CONTEXTOFFSET = TlsSlots + 8
0: kd> dt _TEB
nt!_TEB
+ 0x000 NtTib : _NT_TIB
+ 0x1258 StaticUnicodeString : _UNICODE_STRING
+ 0x1268 StaticUnicodeBuffer : [261] Wchar
+ 0x1472 Padding3 : [6] UChar
+ 0x1478 DeallocationStack : Ptr64 Void
+ 0x1480 TlsSlots : [64] Ptr64 Void
+ 0x1680 TlsLinks : _LIST_ENTRY
+ 0x1690 Vdm : Ptr64 Void
+ 0x1698 ReservedForNtRpc : Ptr64 Void
+ 0x16a0 DbgSsReserved : [2] Ptr64 Void
*/
PWOW64_CONTEXT pCurrentContext = (PWOW64_CONTEXT)(*(ULONG64*)((ULONG64)pTeb + WOW64CONTEXTOFFSET));
DbgPrint("[-] 当前上下文EIP = %p \n", pCurrentContext->Eip);
// 检查上下文是否可读
ProbeForRead((PVOID)pCurrentContext, sizeof(pCurrentContext), sizeof(CHAR));
UCHAR Code[] = {
0xb8, 0x0, 0x0, 0x0, 0x0, // mov eax, orgEip
0x58, // pop eax
0xc3 // ret
};
// 将ShellCode拷贝到InjectBuffer中等待处理
RtlCopyMemory(allcateAddress, Code, sizeof(Code));
DbgPrint("[*] 拷贝 [%p] 内存 \n", allcateAddress);;
// 修改代码模板，将指定位置替换为我们自己的代码
*(ULONG*)((PUCHAR)allcateAddress + 1) = pCurrentContext->Eip;
DbgPrint("[*] 替换 [ %p ] 跳转地址 \n", pCurrentContext->Eip);
// 执行线程
pCurrentContext->Eip = (ULONG)(ULONG64)(allcateAddress);
DbgPrint("[*] 执行 [ %p ] 线程函数 \n", pCurrentContext->Eip);
}
}
__except (EXCEPTION_EXECUTE_HANDLER) {}
// 恢复线程
g_PsResumeThread(threadObj, NULL);
ObDereferenceObject(threadObj);
}
NtClose(threadHandle);
}
// 关闭线程
KeUnstackDetachProcess(&kApc);
ObDereferenceObject(pEprocess);
}
return STATUS_SUCCESS;
}
NTSTATUS UnDriver(PDRIVER_OBJECT driver)
{
UNREFERENCED_PARAMETER(driver);
return STATUS_SUCCESS;
}
NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
DbgPrint("Hello LyShark.com \n");
UNREFERENCED_PARAMETER(RegistryPath);
// 初始化基址
InitAddress(Driver);
ULONG ProcessID = 4904;
PVOID AllcateAddress = NULL;
DWORD create_size = 1024;
// 申请堆 《内核远程堆分配与销毁》核心代码
NTSTATUS Status = AllocMemory(ProcessID, create_size, &AllcateAddress);
// 执行ShellCode线程注入
Status = GetCurrentContext(ProcessID, &AllcateAddress);
Driver->DriverUnload = UnDriver;
return STATUS_SUCCESS;
}
运行如上代码片段，则将输出进程ID=4904的当前进程内，线程上下文RIP地址，输出效果如下图所示；
KernelInjectDLL 驱动注入: 如上代码中我们已经找到了驱动注入时所需用到的关键函数，那么实现代码就变得很容易了，驱动注入的实现方式有很多种，不论哪一种其实现的难度并不在于代码本身，而在于某些结构如何正确的被找到，一旦结构被找到原理方面的代码可以说非常容易获取到，如下这段完整代码则是驱动注入的一个简化版，如果你觉得不方便完全可以自行添加IOCTL控制器让其更易于使用，此处为了节约篇幅不在增加冗余代码，代码已做具体分析和备注。
此注入驱动核心实现代码如下所示，其中SearchOPcode用于在内核模块中寻找符合条件的内存地址，GetNativeCode则用于生成一段可被调用的ShellCode代码，此代码执行的目的就是将DLL动态装载到对端内存中，SetThreadStartAddress则用于填充执行线程结构信息，GetUserModule用户获取进程内特定模块的基址，GetModuleExport用于在模块内寻找特定函数的基址，KernelInjectDLL则是最终注入函数，其首先将线程暂停，并注入生成的ShellCode，然后恢复线程让ShellCode跑起来，当ShellCode跑起来后将会自动的将特定目录下的DLL拉起来，以此来实现动态加载的目的。
// 署名权
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: me@lyshark.com
#include "lyshark.h"
// 内核特征码定位函数封装
PVOID SearchOPcode(PDRIVER_OBJECT pObj, PWCHAR DriverName, PCHAR sectionName, PUCHAR opCode, int len, int offset)
{
PVOID dllBase = NULL;
UNICODE_STRING uniDriverName;
PKLDR_DATA_TABLE_ENTRY firstentry;
// 获取驱动入口
PKLDR_DATA_TABLE_ENTRY entry = (PKLDR_DATA_TABLE_ENTRY)pObj->DriverSection;
firstentry = entry;
RtlInitUnicodeString(&uniDriverName, DriverName);
// 开始遍历
while ((PKLDR_DATA_TABLE_ENTRY)entry->InLoadOrderLinks.Flink != firstentry)
{
// 如果找到了所需模块则将其基地址返回
if (entry->FullDllName.Buffer != 0 && entry->BaseDllName.Buffer != 0)
{
if (RtlCompareUnicodeString(&uniDriverName, &(entry->BaseDllName), FALSE) == 0)
{
dllBase = entry->DllBase;
break;
}
}
entry = (PKLDR_DATA_TABLE_ENTRY)entry->InLoadOrderLinks.Flink;
}
if (dllBase)
{
__try
{
// 载入模块基地址
PIMAGE_DOS_HEADER ImageDosHeader = (PIMAGE_DOS_HEADER)dllBase;
if (ImageDosHeader->e_magic != IMAGE_DOS_SIGNATURE)
{
return NULL;
}
// 得到模块NT头
PIMAGE_NT_HEADERS64 pImageNtHeaders64 = (PIMAGE_NT_HEADERS64)((PUCHAR)dllBase + ImageDosHeader->e_lfanew);
// 获取节表头
PIMAGE_SECTION_HEADER pSectionHeader = (PIMAGE_SECTION_HEADER)((PUCHAR)pImageNtHeaders64 + sizeof(pImageNtHeaders64->Signature) + sizeof(pImageNtHeaders64->FileHeader) + pImageNtHeaders64->FileHeader.SizeOfOptionalHeader);
PUCHAR endAddress = 0;
PUCHAR starAddress = 0;
// 寻找符合条件的节
for (int i = 0; i < pImageNtHeaders64->FileHeader.NumberOfSections; i++)
{
// 寻找符合条件的表名
if (memcmp(sectionName, pSectionHeader->Name, strlen(sectionName) + 1) == 0)
{
// 取出开始和结束地址
starAddress = pSectionHeader->VirtualAddress + (PUCHAR)dllBase;
endAddress = pSectionHeader->VirtualAddress + (PUCHAR)dllBase + pSectionHeader->SizeOfRawData;
break;
}
// 遍历下一个节
pSectionHeader++;
}
if (endAddress && starAddress)
{
// 找到会开始寻找特征
for (; starAddress < endAddress - len - 1; starAddress++)
{
// 验证访问权限
if (MmIsAddressValid(starAddress))
{
int i = 0;
for (; i < len; i++)
{
// 判断是否为通配符'*'
if (opCode[i] == 0x2a)
continue;
// 找到了一个字节则跳出
if (opCode[i] != starAddress[i])
break;
}
// 找到次数完全匹配则返回地址
if (i == len)
{
return starAddress + offset;
}
}
}
}
}
__except (EXCEPTION_EXECUTE_HANDLER) {}
}
return NULL;
}
// 生成64位注入代码
PINJECT_BUFFER GetNativeCode(PVOID LdrLoadDll, PUNICODE_STRING DllFullPath, ULONGLONG orgEip)
{
SIZE_T Size = PAGE_SIZE;
PINJECT_BUFFER InjectBuffer = NULL;
UCHAR Code[] = {
0x41, 0x57, // push r15
0x41, 0x56, // push r14
0x41, 0x55, // push r13
0x41, 0x54, // push r12
0x41, 0x53, // push r11
0x41, 0x52, // push r10
0x41, 0x51, // push r9
0x41, 0x50, // push r8
0x50, // push rax
0x51, // push rcx
0x53, // push rbx
0x52, // push rdx
0x55, // push rbp
0x54, // push rsp
0x56, // push rsi
0x57, // push rdi
0x66, 0x9C, // pushf
0x48, 0x83, 0xEC, 0x26, // sub rsp, 0x28
0x48, 0x31, 0xC9, // xor rcx, rcx
0x48, 0x31, 0xD2, // xor rdx, rdx
0x49, 0xB8, 0, 0, 0, 0, 0, 0, 0, 0, // mov r8, ModuleFileName offset +38
0x49, 0xB9, 0, 0, 0, 0, 0, 0, 0, 0, // mov r9, ModuleHandle offset +48
0x48, 0xB8, 0, 0, 0, 0, 0, 0, 0, 0, // mov rax, LdrLoadDll offset +58
0xFF, 0xD0, // call rax
0x48, 0xBA, 0, 0, 0, 0, 0, 0, 0, 0, // mov rdx, COMPLETE_OFFSET offset +70
0xC7, 0x02, 0x7E, 0x1E, 0x37, 0xC0, // mov [rdx], CALL_COMPLETE
0x48, 0xBA, 0, 0, 0, 0, 0, 0, 0, 0, // mov rdx, STATUS_OFFSET offset +86
0x89, 0x02, // mov [rdx], eax
0x48, 0x83, 0xC4, 0x26, // add rsp, 0x28
0x66, 0x9D, // popf
0x5F, // pop rdi
0x5E, // pop rsi
0x5C, // pop rsp
0x5D, // pop rbp
0x5A, // pop rdx
0x5B, // pop rbx
0x59, // pop rcx
0x58, // pop rax
0x41, 0x58, // pop r8
0x41, 0x59, // pop r9
0x41, 0x5A, // pop r10
0x41, 0x5B, // pop r11
0x41, 0x5C, // pop r12
0x41, 0x5D, // pop r13
0x41, 0x5E, // pop r14
0x41, 0x5F, // pop r15
0x50, // push rax
0x50, // push rax
0x48, 0xB8, 0, 0, 0, 0, 0, 0, 0, 0, // mov rax, orgEip offset +130
0x48, 0x89, 0x44, 0x24, 0x08, // mov [rsp+8],rax
0x58, // pop rax
0xC3 // ret
};
// 在当前进程内分配内存空间
if (NT_SUCCESS(ZwAllocateVirtualMemory(ZwCurrentProcess(), &InjectBuffer, 0, &Size, MEM_COMMIT, PAGE_EXECUTE_READWRITE)))
{
// 初始化路径变量与长度参数
PUNICODE_STRING UserPath = &InjectBuffer->Path;
UserPath->Length = DllFullPath->Length;
UserPath->MaximumLength = DllFullPath->MaximumLength;
UserPath->Buffer = InjectBuffer->Buffer;
RtlUnicodeStringCopy(UserPath, DllFullPath);
// 将ShellCode拷贝到InjectBuffer中等待处理
memcpy(InjectBuffer, Code, sizeof(Code));
// 修改代码模板，将指定位置替换为我们自己的代码
*(ULONGLONG*)((PUCHAR)InjectBuffer + 38) = (ULONGLONG)UserPath;
*(ULONGLONG*)((PUCHAR)InjectBuffer + 48) = (ULONGLONG)& InjectBuffer->ModuleHandle;
*(ULONGLONG*)((PUCHAR)InjectBuffer + 58) = (ULONGLONG)LdrLoadDll;
*(ULONGLONG*)((PUCHAR)InjectBuffer + 70) = (ULONGLONG)& InjectBuffer->Complete;
*(ULONGLONG*)((PUCHAR)InjectBuffer + 86) = (ULONGLONG)& InjectBuffer->Status;
*(ULONGLONG*)((PUCHAR)InjectBuffer + 130) = orgEip;
return InjectBuffer;
}
return NULL;
}
// 生成32位注入代码
PINJECT_BUFFER GetWow64Code(PVOID LdrLoadDll, PUNICODE_STRING DllFullPath, ULONG orgEip)
{
SIZE_T Size = PAGE_SIZE;
PINJECT_BUFFER InjectBuffer = NULL;
UCHAR Code[] = {
0x60, // pushad
0x9c, // pushfd
0x68, 0, 0, 0, 0, // push ModuleHandle offset +3
0x68, 0, 0, 0, 0, // push ModuleFileName offset +8
0x6A, 0, // push Flags
0x6A, 0, // push PathToFile
0xE8, 0, 0, 0, 0, // call LdrLoadDll offset +17
0xBA, 0, 0, 0, 0, // mov edx, COMPLETE_OFFSET offset +22
0xC7, 0x02, 0x7E, 0x1E, 0x37, 0xC0, // mov [edx], CALL_COMPLETE
0xBA, 0, 0, 0, 0, // mov edx, STATUS_OFFSET offset +33
0x89, 0x02, // mov [edx], eax
0x9d, // popfd
0x61, // popad
0x50, // push eax
0x50, // push eax
0xb8, 0, 0, 0, 0, // mov eax, orgEip
0x89, 0x44, 0x24, 0x04, // mov [esp+4],eax
0x58, // pop eax
0xc3 // ret
};
/*
如下代码中通过定义Code并写入调用模块加载的汇编指令集，通过运用ZwAllocateVirtualMemory在当前进程也就是附加到对端以后的进程内动态开辟了一块长度为Size的内存空间并赋予了PAGE_EXECUTE_READWRITE读写执行属性，
由于Code代码无法直接使用，则此处调用RtlCopyMemory将指令拷贝到了InjectBuffer其目的是用于后续的填充工作，最后通过*(ULONG*)((PUCHAR)InjectBuffer + 3)的方式将需要使用的函数地址，
模块信息等依次填充到汇编代码的指定位置，并返回InjectBuffer指针。
*/
// 在当前进程内分配内存空间
if (NT_SUCCESS(ZwAllocateVirtualMemory(ZwCurrentProcess(), &InjectBuffer, 0, &Size, MEM_COMMIT, PAGE_EXECUTE_READWRITE)))
{
// 初始化路径变量与长度参数
PUNICODE_STRING32 pUserPath = &InjectBuffer->Path32;
pUserPath->Length = DllFullPath->Length;
pUserPath->MaximumLength = DllFullPath->MaximumLength;
pUserPath->Buffer = (ULONG)(ULONG_PTR)InjectBuffer->Buffer;
// 将ShellCode拷贝到InjectBuffer中等待处理
memcpy((PVOID)pUserPath->Buffer, DllFullPath->Buffer, DllFullPath->Length);
memcpy(InjectBuffer, Code, sizeof(Code));
// 修改代码模板，将指定位置替换为我们自己的代码
*(ULONG*)((PUCHAR)InjectBuffer + 3) = (ULONG)(ULONG_PTR)& InjectBuffer->ModuleHandle;
*(ULONG*)((PUCHAR)InjectBuffer + 8) = (ULONG)(ULONG_PTR)pUserPath;
*(ULONG*)((PUCHAR)InjectBuffer + 17) = (ULONG)((ULONG_PTR)LdrLoadDll - ((ULONG_PTR)InjectBuffer + 17) - 5 + 1);
*(ULONG*)((PUCHAR)InjectBuffer + 22) = (ULONG)(ULONG_PTR)& InjectBuffer->Complete;
*(ULONG*)((PUCHAR)InjectBuffer + 33) = (ULONG)(ULONG_PTR)& InjectBuffer->Status;
*(ULONG*)((PUCHAR)InjectBuffer + 44) = orgEip;
return InjectBuffer;
}
return NULL;
}
// 设置线程执行地址
NTSTATUS SetThreadStartAddress(PETHREAD pEthread, BOOLEAN isWow64, PVOID LdrLoadDll, PUNICODE_STRING DllFullPath, PINJECT_BUFFER *allcateAddress)
{
__try
{
// 判断是32位则执行
if (isWow64)
{
// 得到线程TEB
PVOID pTeb = g_PsGetThreadTeb(pEthread);
if (pTeb)
{
// 得到当前线程上下文
PWOW64_CONTEXT pCurrentContext = (PWOW64_CONTEXT)(*(ULONG64*)((ULONG64)pTeb + WOW64CONTEXTOFFSET));
// 检查上下文是否可读
ProbeForRead((PVOID)pCurrentContext, sizeof(pCurrentContext), sizeof(CHAR));
// 生成注入代码
PINJECT_BUFFER newAddress = GetWow64Code(LdrLoadDll, DllFullPath, pCurrentContext->Eip);
if (newAddress)
{
// 替换上下文地址到内存中
newAddress->orgRipAddress = (ULONG64)& (pCurrentContext->Eip);
newAddress->orgRip = pCurrentContext->Eip;
*allcateAddress = newAddress;
pCurrentContext->Eip = (ULONG)(ULONG64)(newAddress);
}
return STATUS_SUCCESS;
}
}
// 执行64位代码
else
{
// 验证地址是否可读取
if (MmIsAddressValid((PVOID)* (ULONG64*)((ULONG64)pEthread + INITIALSTACKOFFSET)))
{
// 当前TID
PKTRAP_FRAME pCurrentTrap = (PKTRAP_FRAME)(*(ULONG64*)((ULONG64)pEthread + INITIALSTACKOFFSET) - sizeof(KTRAP_FRAME));
// 生成注入代码
PINJECT_BUFFER newAddress = GetNativeCode(LdrLoadDll, DllFullPath, pCurrentTrap->Rip);
if (newAddress)
{
// 替换当前RIP地址
newAddress->orgRipAddress = (ULONG64)& (pCurrentTrap->Rip);
newAddress->orgRip = pCurrentTrap->Rip;
*allcateAddress = newAddress;
pCurrentTrap->Rip = (ULONG64)newAddress;
}
}
return STATUS_SUCCESS;
}
}
__except (EXCEPTION_EXECUTE_HANDLER) {}
return STATUS_UNSUCCESSFUL;
}
// 得到当前用户进程下的模块基址
PVOID GetUserModule(IN PEPROCESS EProcess, IN PUNICODE_STRING ModuleName, IN BOOLEAN IsWow64)
{
if (EProcess == NULL)
return NULL;
__try
{
// 执行32位
if (IsWow64)
{
// 获取32位下的PEB进程环境块
PPEB32 Peb32 = (PPEB32)g_PsGetProcessWow64Process(EProcess);
if (Peb32 == NULL)
return NULL;
if (!Peb32->Ldr)
return NULL;
// 循环遍历链表 寻找模块
for (PLIST_ENTRY32 ListEntry = (PLIST_ENTRY32)((PPEB_LDR_DATA32)Peb32->Ldr)->InLoadOrderModuleList.Flink;
ListEntry != &((PPEB_LDR_DATA32)Peb32->Ldr)->InLoadOrderModuleList;
ListEntry = (PLIST_ENTRY32)ListEntry->Flink)
{
UNICODE_STRING UnicodeString;
PLDR_DATA_TABLE_ENTRY32 LdrDataTableEntry32 = CONTAINING_RECORD(ListEntry, LDR_DATA_TABLE_ENTRY32, InLoadOrderLinks);
// 初始化模块名
RtlUnicodeStringInit(&UnicodeString, (PWCH)LdrDataTableEntry32->BaseDllName.Buffer);
// 对比模块名是否符合
if (RtlCompareUnicodeString(&UnicodeString, ModuleName, TRUE) == 0)
return (PVOID)LdrDataTableEntry32->DllBase;
}
}
// 执行64位
else
{
// 得到64位PEB进程环境块
PPEB Peb = PsGetProcessPeb(EProcess);
if (!Peb)
return NULL;
if (!Peb->Ldr)
return NULL;
// 开始遍历模块
for (PLIST_ENTRY ListEntry = Peb->Ldr->InLoadOrderModuleList.Flink;
ListEntry != &Peb->Ldr->InLoadOrderModuleList;
ListEntry = ListEntry->Flink)
{
// 得到表头
PLDR_DATA_TABLE_ENTRY LdrDataTableEntry = CONTAINING_RECORD(ListEntry, LDR_DATA_TABLE_ENTRY, InLoadOrderLinks);
// 判断是否是所需要的模块
if (RtlCompareUnicodeString(&LdrDataTableEntry->BaseDllName, ModuleName, TRUE) == 0)
return LdrDataTableEntry->DllBase;
}
}
}
__except (EXCEPTION_EXECUTE_HANDLER){}
return NULL;
}
// 根据函数名得到导出表地址
PVOID GetModuleExport(IN PVOID ModuleBase, IN PCCHAR FunctionName)
{
PIMAGE_DOS_HEADER ImageDosHeader = (PIMAGE_DOS_HEADER)ModuleBase;
PIMAGE_NT_HEADERS32 ImageNtHeaders32 = NULL;
PIMAGE_NT_HEADERS64 ImageNtHeaders64 = NULL;
PIMAGE_EXPORT_DIRECTORY ImageExportDirectory = NULL;
ULONG ExportDirectorySize = 0;
ULONG_PTR FunctionAddress = 0;
if (ModuleBase == NULL)
return NULL;
__try
{
// 判断是否是DOS头
if (ImageDosHeader->e_magic != IMAGE_DOS_SIGNATURE)
{
return NULL;
}
// 获取PE结构节NT头
ImageNtHeaders32 = (PIMAGE_NT_HEADERS32)((PUCHAR)ModuleBase + ImageDosHeader->e_lfanew);
ImageNtHeaders64 = (PIMAGE_NT_HEADERS64)((PUCHAR)ModuleBase + ImageDosHeader->e_lfanew);
// 判断是否是64位
if (ImageNtHeaders64->OptionalHeader.Magic == IMAGE_NT_OPTIONAL_HDR64_MAGIC)
{
// 如果是64位则执行如下
ImageExportDirectory = (PIMAGE_EXPORT_DIRECTORY)(ImageNtHeaders64->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress + (ULONG_PTR)ModuleBase);
ExportDirectorySize = ImageNtHeaders64->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size;
}
else
{
// 如果32位则执行如下
ImageExportDirectory = (PIMAGE_EXPORT_DIRECTORY)(ImageNtHeaders32->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress + (ULONG_PTR)ModuleBase);
ExportDirectorySize = ImageNtHeaders32->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size;
}
// 取出导出表Index，名字，函地址等
PUSHORT pAddressOfOrds = (PUSHORT)(ImageExportDirectory->AddressOfNameOrdinals + (ULONG_PTR)ModuleBase);
PULONG pAddressOfNames = (PULONG)(ImageExportDirectory->AddressOfNames + (ULONG_PTR)ModuleBase);
PULONG pAddressOfFuncs = (PULONG)(ImageExportDirectory->AddressOfFunctions + (ULONG_PTR)ModuleBase);
// 循环导出表
for (ULONG i = 0; i < ImageExportDirectory->NumberOfFunctions; ++i)
{
USHORT OrdIndex = 0xFFFF;
PCHAR pName = NULL;
// 说明是序号导出
if ((ULONG_PTR)FunctionName <= 0xFFFF)
{
// 得到函数序号
OrdIndex = (USHORT)i;
}
// 说明是名字导出
else if ((ULONG_PTR)FunctionName > 0xFFFF && i < ImageExportDirectory->NumberOfNames)
{
// 得到函数名
pName = (PCHAR)(pAddressOfNames[i] + (ULONG_PTR)ModuleBase);
OrdIndex = pAddressOfOrds[i];
}
else
return NULL;
// 判断函数名是否符合
if (((ULONG_PTR)FunctionName <= 0xFFFF && (USHORT)((ULONG_PTR)FunctionName) == OrdIndex + ImageExportDirectory->Base) ||
((ULONG_PTR)FunctionName > 0xFFFF && strcmp(pName, FunctionName) == 0))
{
// 得到完整地址
FunctionAddress = pAddressOfFuncs[OrdIndex] + (ULONG_PTR)ModuleBase;
break;
}
}
}
__except (EXCEPTION_EXECUTE_HANDLER){}
return (PVOID)FunctionAddress;
}
// DLL模块注入线程函数
NTSTATUS KernelInjectDLL(ULONG pid, PUNICODE_STRING DllFullPath, PINJECT_BUFFER* allcateAddress)
{
PEPROCESS pEprocess = NULL;
// 根据PID得到进程Eprocess结构
if (NT_SUCCESS(PsLookupProcessByProcessId((HANDLE)pid, &pEprocess)))
{
KAPC_STATE kApc = { 0 };
// 附加到进程内
KeStackAttachProcess(pEprocess, &kApc);
// 得到Ntdll.dll模块基址
UNICODE_STRING ntdllString = RTL_CONSTANT_STRING(L"Ntdll.dll");
PVOID NtdllAddress = GetUserModule(pEprocess, &ntdllString, g_PsGetProcessWow64Process(pEprocess) != 0);
if (!NtdllAddress)
{
// 失败了则直接脱离附加
KeUnstackDetachProcess(&kApc);
ObDereferenceObject(pEprocess);
return STATUS_UNSUCCESSFUL;
}
// 得到LdrLoadDLL模块的基址
PVOID LdrLoadDll = GetModuleExport(NtdllAddress, "LdrLoadDll");
if (!LdrLoadDll)
{
KeUnstackDetachProcess(&kApc);
ObDereferenceObject(pEprocess);
return STATUS_UNSUCCESSFUL;
}
HANDLE threadHandle = NULL;
// 得到当前正在运行的线程上下文
if (NT_SUCCESS(g_ZwGetNextThread((HANDLE)-1, (HANDLE)0, 0x1FFFFF, 0x240, 0, &threadHandle)))
{
PVOID threadObj = NULL;
// 在对象句柄上提供访问验证，如果可以授予访问权限，则返回指向对象的正文的相应指针。
NTSTATUS state = ObReferenceObjectByHandle(threadHandle, 0x1FFFFF, *PsThreadType, KernelMode, &threadObj, NULL);
if (NT_SUCCESS(state))
{
// 暂停线程
g_PsSuspendThread(threadObj, NULL);
// 设置线程ShellCode代码
SetThreadStartAddress(threadObj, g_PsGetProcessWow64Process(pEprocess) != 0, LdrLoadDll, DllFullPath, allcateAddress);
// 恢复线程
g_PsResumeThread(threadObj, NULL);
ObDereferenceObject(threadObj);
}
NtClose(threadHandle);
}
// 关闭线程
KeUnstackDetachProcess(&kApc);
ObDereferenceObject(pEprocess);
}
return STATUS_SUCCESS;
}
NTSTATUS UnDriver(PDRIVER_OBJECT driver)
{
UNREFERENCED_PARAMETER(driver);
return STATUS_SUCCESS;
}
NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
DbgPrint("Hello LyShark.com \n");
UNREFERENCED_PARAMETER(RegistryPath);
// -----------------------------------------------------------------------
// 初始化
// -----------------------------------------------------------------------
UCHAR SuspendOpCode[] = { 0x48, 0x8b, 0xf9, 0x83, 0x64, 0x24, 0x20, 0x00, 0x65, 0x48, 0x8b, 0x34, 0x25, 0x88, 0x01 };
UCHAR ResumeOpCode[] = { 0x48, 0x8b, 0xf9, 0xe8, 0xee, 0x4f, 0xa5, 0xff, 0x65, 0x48, 0x8b, 0x14, 0x25, 0x88 };
// 特征码检索PsSuspendThread函数基址
g_PsSuspendThread = (PPsSuspendThread)SearchOPcode(Driver, L"ntoskrnl.exe", "PAGE", SuspendOpCode, sizeof(SuspendOpCode), -24);
DbgPrint("PsSuspendThread = %p \n", g_PsSuspendThread);
// 特征码检索PsResumeThread基址
g_PsResumeThread = (PPsResumeThread)SearchOPcode(Driver, L"ntoskrnl.exe", "PAGE", ResumeOpCode, sizeof(ResumeOpCode), -18);
DbgPrint("PsResumeThread = %p \n", g_PsResumeThread);
// 动态获取内存中的ZwGetNextThread基址
UNICODE_STRING ZwGetNextThreadString = RTL_CONSTANT_STRING(L"ZwGetNextThread");
g_ZwGetNextThread = (PZwGetNextThread)MmGetSystemRoutineAddress(&ZwGetNextThreadString);
DbgPrint("ZwGetNextThread = %p \n", g_ZwGetNextThread);
// 动态获取内存中的PsGetThreadTeb基址
UNICODE_STRING PsGetThreadTebString = RTL_CONSTANT_STRING(L"PsGetThreadTeb");
g_PsGetThreadTeb = (PPsGetThreadTeb)MmGetSystemRoutineAddress(&PsGetThreadTebString);
DbgPrint("PsGetThreadTeb = %p \n", g_PsGetThreadTeb);
// 动态获取内存中的PsGetProcessWow64Process基址
UNICODE_STRING PsGetProcessWow64ProcessString = RTL_CONSTANT_STRING(L"PsGetProcessWow64Process");
g_PsGetProcessWow64Process = (PPsGetProcessWow64Process)MmGetSystemRoutineAddress(&PsGetProcessWow64ProcessString);
DbgPrint("PsGetProcessWow64Process = %p \n", g_PsGetProcessWow64Process);
// -----------------------------------------------------------------------
// 注入代码
// -----------------------------------------------------------------------
ULONG ProcessID = 984;
UNICODE_STRING InjectDllPath = RTL_CONSTANT_STRING(L"C:\\Users\\lyshark\\Desktop\\hook.dll");
PINJECT_BUFFER AllcateAddress = NULL;
// 执行线程注入
NTSTATUS Status = KernelInjectDLL(ProcessID, &InjectDllPath, &AllcateAddress);
if (Status == STATUS_SUCCESS)
{
DbgPrint("[*] 线程注入PID = %d | DLL = %wZ \n", ProcessID, InjectDllPath);
}
Driver->DriverUnload = UnDriver;
return STATUS_SUCCESS;
}
首先你需要自行准备好一个DLL文件，此处我的是hook.dll将文件放入到桌面，然后设置ProcessID指定进程ID，设置InjectDllPath指定DLL路径，签名后将驱动加载起来，此时你会看到WinDBG中的输出，且应用层的进程也会弹出hello lyshark的消息，说明注入成功了，如下图所示；
这篇关于驱动开发：内核RIP劫持实现DLL注入的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！
- 2024-12-30Sentinel限流教程：新手入门指南
- 2024-12-30Springboot框架教程：新手入门及初级技巧
- 2024-12-30Springboot框架教程：初学者必看指南
- 2024-12-30Springboot企业级开发教程：从入门到实践
- 2024-12-30Springboot企业级开发教程：新手入门与实践
- 2024-12-30SpringBoot微服务教程：入门与实践
- 2024-12-30SpringBoot项目开发教程：从入门到实践
- 2024-12-30Springboot项目开发教程：从入门到实践
- 2024-12-30SpringCloud Alibaba教程：轻松入门与实践
- 2024-12-30SpringCloud Alibaba教程：入门与实践指南
