大数据组件Logstash日志采集和filebeat采集日志与数据库交互（1+x证书方向）
2022/10/3 2:16:46
本文主要是介绍大数据组件Logstash日志采集和filebeat采集日志与数据库交互（1+x证书方向），对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！
大数据组件Logstash日志采集和filebeat采集日志与数据库交互（1+x证书方向）
.
一、logstash的应用安装与部署
.
1.logstash的应用
logstash作为日志采集，转换工具，是ETL的一部分，Logstash 的作用就 是一个数据收集器，将各种格式各种渠道的数据通过它收集解析之后格式化输 出到Elasticsearch ，最后再由Kibana 提供的比较友好的Web 界面进行 汇总、分析、搜索。
.
2.logstash的安装
首先准备logstash的压缩包：logstash-7.7.0.tar.gz 开始解压缩安装文件：
tar zxvf logstash-7.7.0.tar.gz
解压完成后重命名：
mv logstash-7.7.0.tar.gz logstash
准备解压工作已经完成
.
3.安装logstash-output-jdbc组件
方法一(网络安装法)：进入 logstash的/bin目录，然后执行：
./logstash-plugin install logstash-output-jdbc
网络下载较慢，需等待5分钟左右，成功结果如下：
Validating logstash-output-jdbc Installing logstash-output-jdbc Installation successful
方法二(离线安装logstash-output-jdbc.zip组件)：
同样切换到logstash的bin目录下，使用命令： 注：我的logstash-output-jdbc.zip文件在桌面(file:后面是logstash-output-jdbc.zip的路径)
logstash-plugin install file:/root/Desktop/logstash-output-jdbc.zip
上述两种方法安装完后使用命令查看是否组件加载成功：
logstash-plugin list | grep jdbc
结果如下：
logstash-integration-jdbc |__ logstash-input-jdbc |__ logstash-filter-jdbc_streaming |__ logstash-filter-jdbc_static logstash-output-jdbc
.
4.配置conf文件启动logstash
切换到logstash的config目录下(当前处于logstash目录下)：
logstash]$ cd config/
创建打开一个conf文件1.conf：
使用命令查看是否安装完成： ```powershell logstash-plugin list | grep jdbc
结果如下：
vim 1.conf
内容如下（按下 i 键即可插入文字）：
input{
stdin{
}
}
output{
stdout{
}
}
保存并退出（按下ESC键，并输入 :wq）
启动1.conf命令（当前处于logstash文件下）：
bin/logstash -f config/1.conf
出现如下提示并且不自动退出即为成功（若当前启动或后续其他conf文件在启动时直接自动退出，应当返回检查conf文件内容是否书写正确，格式是否错误）：
Successfully started Logstash API endpoint {
:port=>9600}
输入Mary，出现如下所示信息即为成功：
.
5.配置mysql用于接收logstash输入的数据
打开命令窗口输入数据库命令： password为自己数据库的root密码
mysql -uroot -ppassword
创建新数据库logstash：
create database logstash character set utf8;
创建新数据表logs：
use logstash;
create table logs( id bigint primary key auto_increment, message varchar(4000), host varchar(100), create_time timestamp default now());
创建完数据表后，安装配置数据库连接工具： 在logstash的vendor文件夹下新建一个名为jar的文件夹，再在jar下新建一个jdbc的文件夹 最后将插件mysql-connector-java-5.1.47.jar放在jdbc文件夹内：
[root@node1 jdbc]$ pwd /root/Desktop/logstash/vendor/jar/jdbc [root@node1 jdbc]$ ll total 984 -rw-r--r-- 1 root root 1007502 6u6708 4 15:08 mysql-connector-java-5.1.47.jar
切换到logstash的config文件夹下，新建配置文件2.conf：
vim 2.conf
内容如下（password为自己数据库root用户密码）：
input{
stdin{
}
}
output{
jdbc{
driver_class=>"com.mysql.jdbc.Driver"
connection_string=>"jdbc:mysql://localhost:3306/logstash?characterEncoding=UTF-8"
username=>"root"
password=>"password"
statement=>["insert into logs(message,host) values(?,?)","message","host"]
}
}
output{
stdout{
}
}
保存并退出 切换到logstash的主目录下启动logstash配置2.conf：
bin/logstash -f config/2.conf
成功后输入一下测试（启动成功后依次输入Jack和Mary Rose）： 然后我们需要去数据库确认是否安装成功，启动命令进入logstash数据库：
select * from logs;
结果如下所示，即为插入成功：
+----+-----------+------------+---------------------+ | id | message | host | create_time | +----+-----------+------------+---------------------+ | 1 | Jack | node1.host | 2020-06-04 15:24:07 | | 2 | Mary Rose | node1.host | 2020-06-04 15:24:25 | +----+-----------+------------+---------------------+
. . .
二、filebeat的安装与使用
.
.
1.解压并重命名filebeat压缩包filebeat-7.7.0-linux-x86_64.tar.gz：
tar zxvf filebeat-7.7.0-linux-x86_64.tar.gz
重命名解压文件夹为filebeat：
mv filebeat-7.7.0-linux-x86_64 filebeat
. .
2.使用logstash接受filebeat的信息
重新配置我们需要的插件配置信息，新建一个1.yml
vim 1.yml
内容如下（复制即可）：
###################### Filebeat Configuration Example #########################
# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html
# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.
#=========================== Filebeat inputs =============================
filebeat.inputs:
# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.
- type: log
# Change to true to enable this input configuration.
enabled: ture
# Paths that should be crawled and fetched. Glob based paths.
paths:
- /root/Desktop/logs/*.log
#- c:programdataelasticsearchlogs*
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list.
#exclude_lines: [^DBG]
# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list.
#include_lines: [^ERR, ^WARN]
# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
#exclude_files: [.gz$]
# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering
#fields:
# level: debug
# review: 1
### Multiline options
# Multiline can be used for log messages spanning multiple lines. This is common
# for Java Stack Traces or C-Line Continuation
# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
#multiline.pattern: ^[
# Defines if the pattern set under pattern should be negated or not. Default is false.
#multiline.negate: false
# Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
# that was (not) matched before or after or as long as a pattern is not matched based on negate.
# Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
#multiline.match: after
#============================= Filebeat modules ===============================
filebeat.config.modules:
# Glob pattern for configuration loading
path: ${
path.config}/modules.d/*.yml
# Set to true to enable config reloading
reload.enabled: false
# Period on which files under path should be checked for changes
#reload.period: 10s
#==================== Elasticsearch template setting ==========================
setup.template.settings:
index.number_of_shards: 1
#index.codec: best_compression
#_source.enabled: false
#================================ General =====================================
# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:
# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]
# Optional fields that you can specify to add additional information to the
# output.
#fields:
# env: staging
#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here or by using the `setup` command.
#setup.dashboards.enabled: false
# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:
#============================== Kibana =====================================
# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:
# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
#host: "localhost:5601"
# Kibana Space ID
# ID of the Kibana Space into which the dashboards should be loaded. By default,
# the Default Space will be used.
#space.id:
#============================= Elastic Cloud ==================================
# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).
# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:
# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:
#================================ Outputs =====================================
# Configure what output to use when sending the data collected by the beat.
#-------------------------- Elasticsearch output ------------------------------
#output.elasticsearch:
# Array of hosts to connect to.
#hosts: ["localhost:9200"]
# Protocol - either `http` (default) or `https`.
#protocol: "https"
# Authentication credentials - either API key or username/password.
#api_key: "id:api_key"
#username: "elastic"
#password: "changeme"
#----------------------------- Logstash output --------------------------------
output.logstash:
# The Logstash hosts
hosts: ["localhost:5044"]
# Optional SSL. By default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"
#================================ Processors =====================================
# Configure processors to enhance or manipulate events generated by the beat.
processors:
- add_host_metadata: ~
- add_cloud_metadata: ~
- add_docker_metadata: ~
- add_kubernetes_metadata: ~
#================================ Logging =====================================
# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug
# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]
#============================== X-Pack Monitoring ===============================
# filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
# reporting is disabled by default.
# Set to true to enable the monitoring reporter.
#monitoring.enabled: false
# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:
# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:
#================================= Migration ==================================
# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: true
保存并退出：在filebe文件夹下启动命令
chmod go-w 1.yml
之后来到logstash的config文件夹下新建3.conf文件：
vim 3.conf
内容如下：
input{
beats{
port=>5044
}
}
output{
stdout{
}
}
保存并退出
再次来到filebeat文件夹下，新建打开一个2.yml文件：
vim 2.yml
内容如下：
filebeat.inputs: - type: stdin output.logstash: hosts: ["127.0.0.1:5044"]
保存并退出！
接下来开启一个命令窗口切换到logstash文件夹下先启动logstash加载3.conf文件：
bin/logstash -f config/3.conf
开启另一个命令窗口在切换到filebeat启动2.yml
filebeat -e -c 2.yml
启动后输入Jerry，显示如下信息： 切换到另一个启动logstash的窗口可以看到 到这里filebeat传输信息给logstash已经完成
. . **
3.读取业务日志保存到mysql中
1.上传springboot项目jar包demo-1.0.jar到桌面 桌面启动命令：
java -jar demo-1.0.jar
运行完毕后 会在桌面留下一个logs的文件夹，里面存有日志文件 接下来启动一个命令窗口来到logstash的config目录下，新建打开一个4.conf
vim 4.conf
内容如下： 注：password为自己数据库root用户的密码
input{
beats{
port=>5044
}
}
output{
jdbc{
driver_class=>"com.mysql.jdbc.Driver"
connection_string=>"jdbc:mysql://localhost:3306/logstash?characterEncoding=UTF-8"
username=>"root"
password=>"password"
statement=>["insert into logs(message,host) values(?,?)","message","host"]
}
}
output{
stdout{
}
}
保存并退出
打开另一个命令窗口来到filebeat目录下，新建并打开一个3.yml的文件
vim 3.yml
内容如下： 注意：path路径后是跟springboot的log日志所在的路径*.log是指识别后缀名只为.log的日志文件
filebeat.inputs: - type: log paths: - /root/Desktop/logs/*.log output.logstash: hosts: ["127.0.0.1:5044"]
启动一个命令窗口 来到logstash下启动logstash加载4.conf：
bin/logstash -f config/4.conf
启动成功后放置一边 再启动一个命令窗口来到filebeat目录下加载3.yml
fileneat -e -c 3.yml
filebeat页面出现开始运行： 切换至logstash页面可以看到有数据展示： 最后打开mysql查看logs数据表数据变化：
select * from logs;
结果如下：
+----+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------------+---------------------+
| id | message | host | create_time |
+----+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------------+---------------------+
| 1 | Jack | node1.host | 2020-06-04 15:24:07 |
| 2 | Mary Rose | node1.host | 2020-06-04 15:24:25 |
| 3 | 2020-06-04 16:05:31.656 INFO 2171 --- [main] org.apache.catalina.core.StandardEngine : Starting Servlet engine: [Apache Tomcat/9.0.35] | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 4 | 2020-06-04 16:05:30.663 INFO 2171 --- [main] cn.inspur.DemoApplication : Starting DemoApplication v1.0 on node1.host with PID 2171 (/root/Desktop/demo-1.0.jar started by root in /root/Desktop) | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 5 | 2020-06-04 16:05:31.655 INFO 2171 --- [main] o.apache.catalina.core.StandardService : Starting service [Tomcat] | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 6 | 2020-06-04 16:05:31.644 INFO 2171 --- [main] o.s.b.w.embedded.tomcat.TomcatWebServer : Tomcat initialized with port(s): 8888 (http) | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 7 | 2020-06-04 16:05:31.997 INFO 2171 --- [main] cn.inspur.DemoApplication : Started DemoApplication in 1.708 seconds (JVM running for 2.107) | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 8 | 2020-06-04 16:05:31.846 INFO 2171 --- [main] o.s.s.concurrent.ThreadPoolTaskExecutor : Initializing ExecutorService applicationTaskExecutor | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 9 | 2020-06-04 16:05:31.987 INFO 2171 --- [main] o.s.b.w.embedded.tomcat.TomcatWebServer : Tomcat started on port(s): 8888 (http) with context path | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 10 | 2020-06-04 16:05:30.665 INFO 2171 --- [main] cn.inspur.DemoApplication : No active profile set, falling back to default profiles: default | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 11 | 2020-06-04 16:05:31.711 INFO 2171 --- [main] o.a.c.c.C.[Tomcat].[localhost].[/] : Initializing Spring embedded WebApplicationContext | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
| 12 | 2020-06-04 16:05:31.712 INFO 2171 --- [main] o.s.web.context.ContextLoader : Root WebApplicationContext: initialization completed in 997 ms | {
"name":"node1.host"} | 2020-06-04 16:15:18 |
这篇关于大数据组件Logstash日志采集和filebeat采集日志与数据库交互（1+x证书方向）的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！
- 2024-12-22揭秘 Fluss：下一代流存储，带你走在实时分析的前沿（一）
- 2024-12-20DevOps与平台工程的区别和联系
- 2024-12-20从信息孤岛到数字孪生：一本面向企业的数字化转型实用指南
- 2024-12-20手把手教你轻松部署网站
- 2024-12-20服务器购买课程：新手入门全攻略
- 2024-12-20动态路由表学习：新手必读指南
- 2024-12-20服务器购买学习：新手指南与实操教程
- 2024-12-20动态路由表教程：新手入门指南
- 2024-12-20服务器购买教程：新手必读指南
- 2024-12-20动态路由表实战入门教程
