AirSim学习笔记3：模型训练
2022/1/4 6:12:10
本文主要是介绍AirSim学习笔记3：模型训练，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！
开源项目：
项目地址：https://github.com/Microsoft/AutonomousDrivingCookbook
汉化项目：https://gitee.com/zhoushimin123/autonomous-driving-cookbook
Step 1 - 模型训练
现在我们对正在处理的数据有了一些感觉，可以开始设计我们的模型了。在本笔记本中，我们将定义网络架构并训练模型。我们还将讨论数据上的一些转换，以回应我们在笔记本的数据探索部分所做的观察。
让我们从导入一些库和定义一些路径开始。
from keras.preprocessing.image import ImageDataGenerator from keras.models import Sequential, Model from keras.layers import Conv2D, MaxPooling2D, Dropout, Flatten, Dense, Lambda, Input, concatenate from keras.layers.normalization import BatchNormalization from keras.layers.advanced_activations import ELU from keras.optimizers import Adam, SGD, Adamax, Nadam from keras.callbacks import ReduceLROnPlateau, ModelCheckpoint, CSVLogger, EarlyStopping import keras.backend as K from keras.preprocessing import image from keras_tqdm import TQDMNotebookCallback import json import os import numpy as np import pandas as pd from Generator import DriveDataGenerator from Cooking import checkAndCreateDir import h5py from PIL import Image, ImageDraw import math import matplotlib.pyplot as plt # << 配置前一步预处理好的数据集目录 >> COOKED_DATA_DIR = '../../AirSim/EndToEndLearningRawData/data_cooked/' # << 模型文件输出目录：随着梯度越来越小，模型会逐步更新 >> MODEL_OUTPUT_DIR = 'model'
Using TensorFlow backend.
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\framework\dtypes.py:493: FutureWarning: Passing (type, 1) or '1type' as a synonym of type is deprecated; in a future version of numpy, it will be understood as (type, (1,)) / '(1,)type'.
_np_qint8 = np.dtype([("qint8", np.int8, 1)])
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\framework\dtypes.py:494: FutureWarning: Passing (type, 1) or '1type' as a synonym of type is deprecated; in a future version of numpy, it will be understood as (type, (1,)) / '(1,)type'.
_np_quint8 = np.dtype([("quint8", np.uint8, 1)])
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\framework\dtypes.py:495: FutureWarning: Passing (type, 1) or '1type' as a synonym of type is deprecated; in a future version of numpy, it will be understood as (type, (1,)) / '(1,)type'.
_np_qint16 = np.dtype([("qint16", np.int16, 1)])
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\framework\dtypes.py:496: FutureWarning: Passing (type, 1) or '1type' as a synonym of type is deprecated; in a future version of numpy, it will be understood as (type, (1,)) / '(1,)type'.
_np_quint16 = np.dtype([("quint16", np.uint16, 1)])
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\framework\dtypes.py:497: FutureWarning: Passing (type, 1) or '1type' as a synonym of type is deprecated; in a future version of numpy, it will be understood as (type, (1,)) / '(1,)type'.
_np_qint32 = np.dtype([("qint32", np.int32, 1)])
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\framework\dtypes.py:502: FutureWarning: Passing (type, 1) or '1type' as a synonym of type is deprecated; in a future version of numpy, it will be understood as (type, (1,)) / '(1,)type'.
np_resource = np.dtype([("resource", np.ubyte, 1)])
让我们读探索阶段的数据集。如果不存在，运行[上一步](dataexplorationandprepare .ipynb)笔记本中的代码片段来生成它们。
train_dataset = h5py.File(os.path.join(COOKED_DATA_DIR, 'train.h5'), 'r') eval_dataset = h5py.File(os.path.join(COOKED_DATA_DIR, 'eval.h5'), 'r') test_dataset = h5py.File(os.path.join(COOKED_DATA_DIR, 'test.h5'), 'r') num_train_examples = train_dataset['image'].shape[0] num_eval_examples = eval_dataset['image'].shape[0] num_test_examples = test_dataset['image'].shape[0] batch_size=32
对于图像数据，将整个数据集加载到内存中代价太大。幸运的是，Keras有DataGenerators的概念。DataGenerator只不过是一个迭代器，它将以块的形式从磁盘读取数据。这允许您保持您的CPU和GPU繁忙，增加吞吐量。
我们在探索阶段做了一些观察。现在，让我们想出一个策略，将它们纳入我们的训练算法:
- 只有图像的一小部分是感兴趣的（ROI） -当生成批量时，我们可以删除图像中不感兴趣的部分。
- 数据集显示垂直翻转公差 -当生成批量时，我们可以随机翻转一些图像和Y轴周围的标签，以便模型有新的数据学习。
- 数据集应该对照明的变化保持不变 -当生成批量时，我们可以随机增加或删除图像的亮度，这样模型就可以知道照明的全局变化应该被忽略。
- 数据集有很高比例的零值图像 -当生成批量时，我们可以随机降低一个百分比的数据点，其中转向角度为零，这样模型在训练时看到一个平衡的数据集。
- 从我们的数据集中我们需要转向策略的例子，以便模型学习如何急剧转向 -我们在预处理阶段处理这个问题。
虽然Keras有一些标准的内置图像转换，但它们还不足以满足我们的目的。例如，当在标准的ImageDataGenerator中使用horizontal_flip = True时，标签的符号不会倒过来。幸运的是，我们可以扩展ImageDataGenerator类并实现我们自己的转换逻辑。这样做的代码在Generator.py中——它很简单，但是太长了，不能包含在本笔记本中。
这里，我们将用以下参数初始化生成器: - Zero_Drop_Percentage: 0.9—也就是说，我们将随机丢弃标签为0的90%的数据点
- Brighten_Range: 0.4 -也就是说，每个图像的亮度将被修改高达40%。为了计算“亮度”，我们将图像从RGB空间转换到HSV空间，将“V”坐标上下缩放，再转换回RGB空间。
- ROI:[76,135,0,255] -这是x1, x2, y1, y2矩形，表示图像感兴趣的区域。
思考练习1.1
试着摆弄一下这些参数，看看是否能得到更好的结果。
data_generator = DriveDataGenerator(rescale=1./255., horizontal_flip=True, brighten_range=0.4)
train_generator = data_generator.flow\
(train_dataset['image'], train_dataset['previous_state'], train_dataset['label'], batch_size=batch_size, zero_drop_percentage=0.95, roi=[76,135,0,255])
eval_generator = data_generator.flow\
(eval_dataset['image'], eval_dataset['previous_state'], eval_dataset['label'], batch_size=batch_size, zero_drop_percentage=0.95, roi=[76,135,0,255])
让我们看看一批样品。转向角度用图中红线表示:
def draw_image_with_label(img, label, prediction=None):
theta = label * 0.69 #Steering range for the car is +- 40 degrees -> 0.69 radians
line_length = 50
line_thickness = 3
label_line_color = (255, 0, 0)
prediction_line_color = (0, 0, 255)
pil_image = image.array_to_img(img, K.image_data_format(), scale=True)
print('Actual Steering Angle = {0}'.format(label))
draw_image = pil_image.copy()
image_draw = ImageDraw.Draw(draw_image)
first_point = (int(img.shape[1]/2),img.shape[0])
second_point = (int((img.shape[1]/2) + (line_length * math.sin(theta))), int(img.shape[0] - (line_length * math.cos(theta))))
image_draw.line([first_point, second_point], fill=label_line_color, width=line_thickness)
if (prediction is not None):
print('Predicted Steering Angle = {0}'.format(prediction))
print('L1 Error: {0}'.format(abs(prediction-label)))
theta = prediction * 0.69
second_point = (int((img.shape[1]/2) + (line_length * math.sin(theta))), int(img.shape[0] - (line_length * math.cos(theta))))
image_draw.line([first_point, second_point], fill=prediction_line_color, width=line_thickness)
del image_draw
plt.imshow(draw_image)
plt.show()
[sample_batch_train_data, sample_batch_test_data] = next(train_generator)
for i in range(0, 3, 1):
draw_image_with_label(sample_batch_train_data[0][i], sample_batch_test_data[i])
Actual Steering Angle = [0.011892]
Actual Steering Angle = [0.033569]
Actual Steering Angle = [0.00726667]
接下来，让我们定义网络架构。我们将使用一个标准的结合卷积/max池化层来处理图片(我们不能进入其中每一层所做的细节在这里,但是你一定要看看这本书中提到的readme文件如果你不理解发生了什么)。然后，我们将把车辆的最后已知状态注入神经网络层作为一个附加特征。图层大小和优化参数是通过实验确定的——尝试调整它们，看看会发生什么!
image_input_shape = sample_batch_train_data[0].shape[1:] state_input_shape = sample_batch_train_data[1].shape[1:] activation = 'relu' #Create the convolutional stacks pic_input = Input(shape=image_input_shape) img_stack = Conv2D(16, (3, 3), name="convolution0", padding='same', activation=activation)(pic_input) img_stack = MaxPooling2D(pool_size=(2,2))(img_stack) img_stack = Conv2D(32, (3, 3), activation=activation, padding='same', name='convolution1')(img_stack) img_stack = MaxPooling2D(pool_size=(2, 2))(img_stack) img_stack = Conv2D(32, (3, 3), activation=activation, padding='same', name='convolution2')(img_stack) img_stack = MaxPooling2D(pool_size=(2, 2))(img_stack) img_stack = Flatten()(img_stack) img_stack = Dropout(0.2)(img_stack) #Inject the state input state_input = Input(shape=state_input_shape) merged = concatenate([img_stack, state_input]) # Add a few dense layers to finish the model merged = Dense(64, activation=activation, name='dense0')(merged) merged = Dropout(0.2)(merged) merged = Dense(10, activation=activation, name='dense2')(merged) merged = Dropout(0.2)(merged) merged = Dense(1, name='output')(merged) adam = Nadam(lr=0.0001, beta_1=0.9, beta_2=0.999, epsilon=1e-08) model = Model(inputs=[pic_input, state_input], outputs=merged) model.compile(optimizer=adam, loss='mse')
WARNING:tensorflow:From E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\keras\backend\tensorflow_backend.py:1264: calling reduce_prod (from tensorflow.python.ops.math_ops) with keep_dims is deprecated and will be removed in a future version. Instructions for updating: keep_dims is deprecated, use keepdims instead WARNING:tensorflow:From E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\keras\backend\tensorflow_backend.py:1349: calling reduce_mean (from tensorflow.python.ops.math_ops) with keep_dims is deprecated and will be removed in a future version. Instructions for updating: keep_dims is deprecated, use keepdims instead
Let’s look at a summary of our model
model.summary()
__________________________________________________________________________________________________
Layer (type) Output Shape Param # Connected to
==================================================================================================
input_1 (InputLayer) (None, 59, 255, 3) 0
__________________________________________________________________________________________________
convolution0 (Conv2D) (None, 59, 255, 16) 448 input_1[0][0]
__________________________________________________________________________________________________
max_pooling2d_1 (MaxPooling2D) (None, 29, 127, 16) 0 convolution0[0][0]
__________________________________________________________________________________________________
convolution1 (Conv2D) (None, 29, 127, 32) 4640 max_pooling2d_1[0][0]
__________________________________________________________________________________________________
max_pooling2d_2 (MaxPooling2D) (None, 14, 63, 32) 0 convolution1[0][0]
__________________________________________________________________________________________________
convolution2 (Conv2D) (None, 14, 63, 32) 9248 max_pooling2d_2[0][0]
__________________________________________________________________________________________________
max_pooling2d_3 (MaxPooling2D) (None, 7, 31, 32) 0 convolution2[0][0]
__________________________________________________________________________________________________
flatten_1 (Flatten) (None, 6944) 0 max_pooling2d_3[0][0]
__________________________________________________________________________________________________
dropout_1 (Dropout) (None, 6944) 0 flatten_1[0][0]
__________________________________________________________________________________________________
input_2 (InputLayer) (None, 4) 0
__________________________________________________________________________________________________
concatenate_1 (Concatenate) (None, 6948) 0 dropout_1[0][0]
input_2[0][0]
__________________________________________________________________________________________________
dense0 (Dense) (None, 64) 444736 concatenate_1[0][0]
__________________________________________________________________________________________________
dropout_2 (Dropout) (None, 64) 0 dense0[0][0]
__________________________________________________________________________________________________
dense2 (Dense) (None, 10) 650 dropout_2[0][0]
__________________________________________________________________________________________________
dropout_3 (Dropout) (None, 10) 0 dense2[0][0]
__________________________________________________________________________________________________
output (Dense) (None, 1) 11 dropout_3[0][0]
==================================================================================================
Total params: 459,733
Trainable params: 459,733
Non-trainable params: 0
__________________________________________________________________________________________________
这有很多参数!幸运的是，我们有自己的数据增强策略，因此网络有机会融合。尝试添加/删除层或改变它们的宽度，看看它对网络中可训练参数的数量有什么影响。
Keras的一个很好的特性是声明回调的能力。这些函数在训练的每个阶段之后执行。我们将定义几个回调函数:
- ReduceLrOnPlateau -如果模型接近最小值，而学习速率太高，那么模型将围绕最小值旋转而永远达不到它。当验证损失停止改善时，这个回调将允许我们降低学习率，从而使我们达到最佳点。
- CsvLogger -这让我们可以在每个epoch之后记录模型的输出，这将允许我们在不需要使用控制台的情况下跟踪进程。
- ModelCheckpoint -通常，我们希望使用在验证集中损失最小的模型。每次验证损失改善时，这个回调将保存模型。
- 及早停止 -当验证损失停止改善时，我们将希望停止训练。否则，我们就有过度拟合的风险。该监视器将检测验证损失何时停止改善，并在发生这种情况时停止训练过程。
plateau_callback = ReduceLROnPlateau(monitor='val_loss', factor=0.5, patience=3, min_lr=0.0001, verbose=1)
checkpoint_filepath = os.path.join(MODEL_OUTPUT_DIR, 'models', '{0}_model.{1}-{2}.h5'.format('model', '{epoch:02d}', '{val_loss:.7f}'))
checkAndCreateDir(checkpoint_filepath)
checkpoint_callback = ModelCheckpoint(checkpoint_filepath, save_best_only=True, verbose=1)
csv_callback = CSVLogger(os.path.join(MODEL_OUTPUT_DIR, 'training_log.csv'))
early_stopping_callback = EarlyStopping(monitor='val_loss', patience=10, verbose=1)
callbacks=[plateau_callback, csv_callback, checkpoint_callback, early_stopping_callback, TQDMNotebookCallback()]
是时候训练模型了!在默认设置下，该模型在NVidia GTX970 GPU上训练大约需要45分钟。注:有时模型会被一个长达7个epoch的恒定验证损失卡住。如果让模型继续运行，那么模型应该以大约0.0003的验证损失结束。
history = model.fit_generator(train_generator, steps_per_epoch=num_train_examples//batch_size, epochs=500, callbacks=callbacks,\
validation_data=eval_generator, validation_steps=num_eval_examples//batch_size, verbose=2)
Training: 0%| | 0/500 [00:00<?, ?it/s]
Epoch 0: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 1/500
Epoch 00001: val_loss improved from inf to 0.02272, saving model to model\models\model_model.01-0.0227211.h5
- 255s - loss: 0.0227 - val_loss: 0.0227
Epoch 1: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 2/500
Epoch 00002: val_loss did not improve
- 263s - loss: 0.0224 - val_loss: 0.0227
Epoch 2: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 3/500
Epoch 00003: val_loss improved from 0.02272 to 0.02272, saving model to model\models\model_model.03-0.0227178.h5
- 261s - loss: 0.0225 - val_loss: 0.0227
Epoch 3: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 4/500
Epoch 00004: val_loss improved from 0.02272 to 0.01308, saving model to model\models\model_model.04-0.0130766.h5
- 247s - loss: 0.0214 - val_loss: 0.0131
Epoch 4: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 5/500
Epoch 00005: val_loss improved from 0.01308 to 0.00285, saving model to model\models\model_model.05-0.0028456.h5
- 255s - loss: 0.0072 - val_loss: 0.0028
Epoch 5: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 6/500
Epoch 00006: val_loss improved from 0.00285 to 0.00107, saving model to model\models\model_model.06-0.0010740.h5
- 275s - loss: 0.0036 - val_loss: 0.0011
Epoch 6: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 7/500
Epoch 00007: val_loss improved from 0.00107 to 0.00070, saving model to model\models\model_model.07-0.0006958.h5
- 276s - loss: 0.0027 - val_loss: 6.9578e-04
Epoch 7: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 8/500
Epoch 00008: val_loss improved from 0.00070 to 0.00051, saving model to model\models\model_model.08-0.0005139.h5
- 269s - loss: 0.0024 - val_loss: 5.1388e-04
Epoch 8: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 9/500
Epoch 00009: val_loss improved from 0.00051 to 0.00047, saving model to model\models\model_model.09-0.0004663.h5
- 256s - loss: 0.0020 - val_loss: 4.6628e-04
Epoch 9: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 10/500
Epoch 00010: val_loss improved from 0.00047 to 0.00032, saving model to model\models\model_model.10-0.0003200.h5
- 254s - loss: 0.0019 - val_loss: 3.1998e-04
Epoch 10: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 11/500
Epoch 00011: val_loss did not improve
- 260s - loss: 0.0018 - val_loss: 4.4795e-04
Epoch 11: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 12/500
Epoch 00012: val_loss improved from 0.00032 to 0.00030, saving model to model\models\model_model.12-0.0003030.h5
- 249s - loss: 0.0017 - val_loss: 3.0302e-04
Epoch 12: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 13/500
Epoch 00013: val_loss improved from 0.00030 to 0.00024, saving model to model\models\model_model.13-0.0002441.h5
- 245s - loss: 0.0017 - val_loss: 2.4407e-04
Epoch 13: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 14/500
Epoch 00014: val_loss did not improve
- 241s - loss: 0.0017 - val_loss: 2.6870e-04
Epoch 14: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 15/500
Epoch 00015: val_loss did not improve
- 237s - loss: 0.0017 - val_loss: 2.5549e-04
Epoch 15: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 16/500
Epoch 00016: val_loss did not improve
- 237s - loss: 0.0017 - val_loss: 2.9856e-04
Epoch 16: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 17/500
Epoch 00017: val_loss did not improve
- 237s - loss: 0.0017 - val_loss: 2.6887e-04
Epoch 17: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 18/500
Epoch 00018: val_loss did not improve
- 237s - loss: 0.0016 - val_loss: 2.9193e-04
Epoch 18: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 19/500
Epoch 00019: val_loss did not improve
- 238s - loss: 0.0016 - val_loss: 3.0518e-04
Epoch 19: 0%| | 0/1021 [00:00<?, ?it/s]
Epoch 20/500
---------------------------------------------------------------------------
KeyboardInterrupt Traceback (most recent call last)
<ipython-input-8-50126e7d2d8b> in <module>
1 history = model.fit_generator(train_generator, steps_per_epoch=num_train_examples//batch_size, epochs=500, callbacks=callbacks,\
----> 2 validation_data=eval_generator, validation_steps=num_eval_examples//batch_size, verbose=2)
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\keras\legacy\interfaces.py in wrapper(*args, **kwargs)
85 warnings.warn('Update your `' + object_name +
86 '` call to the Keras 2 API: ' + signature, stacklevel=2)
---> 87 return func(*args, **kwargs)
88 wrapper._original_function = func
89 return wrapper
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\keras\engine\training.py in fit_generator(self, generator, steps_per_epoch, epochs, verbose, callbacks, validation_data, validation_steps, class_weight, max_queue_size, workers, use_multiprocessing, shuffle, initial_epoch)
2145 outs = self.train_on_batch(x, y,
2146 sample_weight=sample_weight,
-> 2147 class_weight=class_weight)
2148
2149 if not isinstance(outs, list):
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\keras\engine\training.py in train_on_batch(self, x, y, sample_weight, class_weight)
1837 ins = x + y + sample_weights
1838 self._make_train_function()
-> 1839 outputs = self.train_function(ins)
1840 if len(outputs) == 1:
1841 return outputs[0]
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\keras\backend\tensorflow_backend.py in __call__(self, inputs)
2355 session = get_session()
2356 updated = session.run(fetches=fetches, feed_dict=feed_dict,
-> 2357 **self.session_kwargs)
2358 return updated[:len(self.outputs)]
2359
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\client\session.py in run(self, fetches, feed_dict, options, run_metadata)
893 try:
894 result = self._run(None, fetches, feed_dict, options_ptr,
--> 895 run_metadata_ptr)
896 if run_metadata:
897 proto_data = tf_session.TF_GetBuffer(run_metadata_ptr)
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\client\session.py in _run(self, handle, fetches, feed_dict, options, run_metadata)
1126 if final_fetches or final_targets or (handle and feed_dict_tensor):
1127 results = self._do_run(handle, final_targets, final_fetches,
-> 1128 feed_dict_tensor, options, run_metadata)
1129 else:
1130 results = []
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\client\session.py in _do_run(self, handle, target_list, fetch_list, feed_dict, options, run_metadata)
1342 if handle is None:
1343 return self._do_call(_run_fn, self._session, feeds, fetches, targets,
-> 1344 options, run_metadata)
1345 else:
1346 return self._do_call(_prun_fn, self._session, handle, feeds, fetches)
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\client\session.py in _do_call(self, fn, *args)
1348 def _do_call(self, fn, *args):
1349 try:
-> 1350 return fn(*args)
1351 except errors.OpError as e:
1352 message = compat.as_text(e.message)
E:\Tools\Anaconda3\envs\airsim2\lib\site-packages\tensorflow\python\client\session.py in _run_fn(session, feed_dict, fetch_list, target_list, options, run_metadata)
1327 return tf_session.TF_Run(session, options,
1328 feed_dict, fetch_list, target_list,
-> 1329 status, run_metadata)
1330
1331 def _prun_fn(session, handle, feed_dict, fetch_list):
KeyboardInterrupt:
让我们做一个快速的检查。我们将加载一些训练图像，并比较标签和预测。如果我们的模型学习得当，这些值应该非常接近。
[sample_batch_train_data, sample_batch_test_data] = next(train_generator)
predictions = model.predict([sample_batch_train_data[0], sample_batch_train_data[1]])
for i in range(0, 3, 1):
draw_image_with_label(sample_batch_train_data[0][i], sample_batch_test_data[i], predictions[i])
Actual Steering Angle = [-0.03708] Predicted Steering Angle = [-0.02686657] L1 Error: [0.01021343]
Actual Steering Angle = [-0.02100967] Predicted Steering Angle = [-0.01909251] L1 Error: [0.00191716]
Actual Steering Angle = [-0.03047433] Predicted Steering Angle = [-0.03524271] L1 Error: [0.00476837]
看起来不错!让我们继续在下一个笔记本中使用AirSim实际运行模型。
开源项目：
项目地址：https://github.com/Microsoft/AutonomousDrivingCookbook
汉化项目：https://gitee.com/zhoushimin123/autonomous-driving-cookbook
这篇关于AirSim学习笔记3：模型训练的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！
- 2024-12-22程序员出海做 AI 工具：如何用 similarweb 找到最佳流量渠道？
- 2024-12-20自建AI入门：生成模型介绍——GAN和VAE浅析
- 2024-12-20游戏引擎的进化史——从手工编码到超真实画面和人工智能
- 2024-12-20利用大型语言模型构建文本中的知识图谱：从文本到结构化数据的转换指南
- 2024-12-20揭秘百年人工智能：从深度学习到可解释AI
- 2024-12-20复杂RAG（检索增强生成）的入门介绍
- 2024-12-20基于大型语言模型的积木堆叠任务研究
- 2024-12-20从原型到生产：提升大型语言模型准确性的实战经验
- 2024-12-20啥是大模型1
- 2024-12-20英特尔的 Lunar Lake 计划：一场未竟的承诺
